Results 1 to 5 of 5
  1. #1
    Join Date
    May 2007
    Location
    Clovelly NSW
    Posts
    0

    Default Advice on Finishing Vic Ash

    I have just completed an extension dining table and two bench seats out of Victorian Ash for my next door neighbour. The want as much as possible to keep the white look of the timber. I think that whatever finish I apply it will darken the timber to a light brown. At the moment I am thinking of using cabots water based poly. Would appreciate any comments.

  2. #2
    Join Date
    Feb 2012
    Location
    Nowra, NSW, Australia
    Age
    66
    Posts
    0

    Default

    Poly is fairly clear, but does have a slight yellow tint. Polycrylic dries clearer, (MinWax), and is also water-based. The finish is the same shade as if the timber was wiped with water or white spirits. It comes in gloss, semi-gloss and satin, in cans or aerosol. As you mentioned, whatever finish you use will darken the timber a little.

    If you decide to go that way, Polycrylic is available from Globak: Minwax® Polycrylic® Protective Finish

    Edit: I think Cabots Crystal Clear is similar, too, if it helps. Never tried it though.
    Last edited by Hermit; 29th October 2013 at 08:58 PM. Reason: More info
    ... Steve

    -- Monkey see, monkey do --

  3. #3
    Join Date
    May 2007
    Location
    Clovelly NSW
    Posts
    0

    Default Advice on Finishing Vic Ash

    Thanks Hermit, looks exactly what I am looking for. How are they for delivery as I checked at my local Bunnings and they don't appear to stock it.

  4. #4
    Join Date
    Feb 2012
    Location
    Nowra, NSW, Australia
    Age
    66
    Posts
    0

    Default

    Quote Originally Posted by mcintoad View Post
    Thanks Hermit, looks exactly what I am looking for. How are they for delivery as I checked at my local Bunnings and they don't appear to stock it.
    Pretty good, usually 2 to 3 days, with tracking. Delivery cost is $10.
    ... Steve

    -- Monkey see, monkey do --

  5. #5
    Join Date
    Oct 2003
    Location
    Canberra
    Age
    48
    Posts
    318

    Default

    What about white or hard shellac from ubeaut? Easy to repair, you can do multiple coats in one day, and comes up a treat with a final coat of eee wax or traditional wax.

    Trav
    Some days we are the flies; some days we are the windscreen

Similar Threads

  1. need you advice on finishing-oil v 2pk poly
    By karlr in forum FINISHING
    Replies: 8
    Last Post: 2nd October 2012, 09:07 PM
  2. Finishing advice Ash
    By Strungout in forum FINISHING
    Replies: 7
    Last Post: 7th August 2011, 10:43 PM
  3. Advice on finishing MDF
    By JustGus in forum FINISHING
    Replies: 2
    Last Post: 6th August 2009, 08:11 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •