UBEAUT EEE or traditional wax?

[Trav]

Hi all - just putting the finishing touches on my hall table. It is made from recycled aust mahogany and finished with 3 coats of tung oil at the moment.

I have sanded back to 800 grit (or was it 1200) before oiling and then I lightly rubbed each coat of oil back before applying the next.

The tung oil finish is nice, but I am keen to wax over the top of it to give it a little more shine. Clearly, the best products for this would be UBEAUT EEE wax or traditional wax! ( shameless plug I know).

Which of these products is best for this kind of job?

Cheers

Trav

[silentC]

Trad. Wax would be the go.

Triple E isn't really a finish in it's own right, although it has some wax in it. It's like a cutting compound which you can use on raw timber before finishing (usually on the lathe with Shellawax) or over other finishes to give them a more silky-satin look/feel. Not sure if it would improve an oil finish, someone else might know. There's a fact sheet for both products on the UBeaut web site.

[aabb]

Trav,


Looking forward to seeing the pics soon.....
I cant get to mine at present ...bit busy (

Albert

[FlyingDuck]

Hi all - just putting the finishing touches on my hall table. It is made from recycled aust mahogany and finished with 3 coats of tung oil at the moment.

Trav, I am after 100% tung oil but can't find it. What is the name of the product you are using, where did you buy it, and is it pure stuff?

[Trav]

Hi FD

Not sure if it is 100% tung oil. I too had some trouble finding pure stuff. I ended up getting this at bunnings - I think it is intergrain or interwood or somethign like that. I'll try to remember to check it tonight.

Trav