Quote Originally Posted by dazzler
Hi all

Got a computer question.

I am installing a D-LINK DI-524 Wireless router on my pc for my laptop.
The adsl modem is a Dynalink RTA 100+. Primusonline.

I can get it set up and then log onto an IP address for dlink which is a setup page. (http://192.168.0.1/)

Go through wizard but once Ive finished it will no longer recognise the adsl and drops out.

any ideas pleasssssssse

cheers

dazzler
Hi Dazzler,

Just recently I put in a Netgear PCMCIA wirless card in my laptop to link up with a Netgear wirless router (which in turn connects to BigPond Cable).

At first I had all sorts of errors & failures to communicate - until I realised that I'd set WEP as the encryption method - but one end at 64bit and the other at 128bit - Duhhh!

If you've set an encryption method (and you should!), then make quite sure that both ends are set to the same spec.

Cheers!