![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 15 of 16
Thread: French polish pumice powder.
-
26th September 2013, 02:14 PM #1
French polish pumice powder.
Where do you get it?
Before you answer ebay, I am not going to buy 3 dollars of dust and pay 18 dollars post from the UK.
I've understand its used in artists painting, tried a few artists shops, nothing.
Understand its used in soap making as well, tried a few of those, nothing.
Tried ladies bunnings, Riot art and craft.
I have looked on ebay and they are all in UK or US and want me to mortgage my house for the postage.
Looked on carbatec and carrolls and not on the web site (although they may have it somewhere in their shops).
Rang a few french polishers to ask where they get it,
One USED to get it from MODOstuc, they don't bring it in anymore.
Second one said they spend time colouring timbermate and bog up with that, then hope the timber doesn't fade in light as the bog won't
I'd like to try it properly, so if anyone has any sources or some they no longer need or another alternative....
Peter
-
26th September 2013, 03:35 PM #2
Ring Master
- Join Date
- May 2006
- Location
- Lake Macquarie NSW Australia
- Posts
- 4
Why don't you look along a beach. Plenty of it washes up at Swansea Heads NSW. You just need to crush it. Maybe a hand mincer wood do the job?
Just a thought.
Regards Ned
-
26th September 2013, 05:16 PM #3
Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 1,460
Peter,
When I did french polishing I used English ( Gilder's) whiting which I bought from St Luke Art in Collingwood.
When I bought it quite a few years ago they sold it in 1 kilo bags.
Peter.
Btw I still have those face plates for you.
-
26th September 2013, 05:24 PM #4
I don't know about pumice, but our host has Tripoli powder which can also be used in French polishing.
Chris
========================================
Life isn't always fair
....................but it's better than the alternative.
-
26th September 2013, 05:36 PM #5
Thanks Pete and Chris,
Not sure the tripoli powder is what I'm after ATM.
I want it in the first coats to act as a pore filler not for final finish sheen level.
Although I think I'll get some so I can do this as well at the end as well.
Wonder if anyone at Melb wood Show is going to have any, might have to wait for that and have a good look.
Ah well, we keep looking.
Peter
-
26th September 2013, 08:38 PM #6
http://www.e-artstore.net/pumice-powder-500g-p-659.html
Art Materials - art supplies, art materials, and more.
That's just from a quick search. Hope it helps.
Craig.
-
26th September 2013, 08:56 PM #7
Member
- Join Date
- Sep 2007
- Location
- Maitland
- Posts
- 29
Pumice Powder
Try Goods and Chattels in Queensland. The last time I purchased some was from there. They are good to deal with.
Router
-
27th September 2013, 12:08 AM #8
Senior Member
- Join Date
- Aug 2008
- Location
- Sydney - North Shore
- Posts
- 4
A
Try Graeme Brown Antiques at Toorak
http://www.gbrownantiques.com.au/pdf...0pricelist.pdf
John
-
27th September 2013, 12:24 AM #9
OK, Thanks for all the options.
didn't go for the art one as I could not work out how fine it was.
Ordered thru goods and chattels.
Although I have received no email saying I have, or details where to send money to.
When I logged back into their site it says I have no order history?
Peter
-
27th September 2013, 03:22 AM #10
Another option is an equivalent substance called 'Rottenstone'.
Dragonfly
No-one suspects the dragonfly!
-
27th September 2013, 03:31 PM #11
Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 0
-
27th September 2013, 03:33 PM #12
Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 0
And for gain filling, I was told that English Whiting (also as posted) was the go. Apply, sand back and my source said then apply a clear oil to the lot as a prep for french polishing.
Cheers, Ern
-
27th September 2013, 03:47 PM #13
Thanks Ern,
I was going to get some of that whiting powder in collingwood this morning.
Motor bike would not restart after the accountant this morning in the city so once I got it going again (jump start from rent a bomb a few doors up) wasn't going to stop anywhere in case it didn't start again.
I'm going to put it on my shopping list for next time I'm that way.
I have ordered fine and extra fine this morning from good and chattels.
I did ring a mob I found on the web that taught it but when I rang they no longer do the classes.
Why don't they update their webpages????
-
27th September 2013, 04:07 PM #14
Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 0
Good luck with it.
I've got some uBeaut talc that you can have.
(Not riding enough in the winter? Have just had to replace my bike battery; starting was getting slow so the time was nigh. For winter hibernation I've been giving it the occasional charge but should buy a trickle charger for it).Cheers, Ern
-
27th September 2013, 08:16 PM #15
Member
- Join Date
- Sep 2007
- Location
- Maitland
- Posts
- 29
Role of Pumice
The role of pumice is to totally fill all the grain holes in the timber. It works best by using a piece of wool in your rubber placed on the outside of the cotton wool and after you have filled the rubber with shellac take the now wet inside of the rubber and dip the wool section into the pumice and then replace the complete inside of the rubber back into the outer cloth, tie it up tightly and you are ready to go.
Good luck, it takes some patience but it is worth the effort.
Regards
Router
Similar Threads
-
French polish mop oil(which one?)
By Macleod in forum FINISHINGReplies: 24Last Post: 29th July 2012, 09:02 AM -
What's going on here with this French polish?
By mic-d in forum FINISHINGReplies: 14Last Post: 29th September 2011, 09:55 PM -
French Polish
By hap97 in forum RESTORATIONReplies: 0Last Post: 25th March 2009, 06:04 PM -
French Polish
By 46150 in forum FINISHINGReplies: 3Last Post: 23rd July 2008, 11:55 AM -
A little help with french polish
By joseph84 in forum FINISHINGReplies: 7Last Post: 13th March 2006, 07:23 PM