![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Attach perspex to steel gate
-
2nd September 2013, 09:50 PM #1
Attach perspex to steel gate
Our security gate is made from solid steel bars. The hinges are welded to the frame and positioned so that the gate cannot be removed from the frame - the hinge pins cannot be removed.
The gate has been painted with black paint.
I am trying to attach a perspex sheet to this gate for privacy reasons.
Because the bars are solid, pop rivets will not work.
I have tried to use Selleys Liquid Nails (Clear), but this does not work, no matter how long I clamped the perspex and the gate.
The attached picture shows the edge of the gate.
Any suggestions how I could attach the perspex to the steel gate, would be appreciated.
Attached Images
-
20130901_103756.jpg (251.8 KB)
Read and reply to the full thread at RenovateForum.com....
-
Similar Threads
-
Need a hydraulic gate closer for this gate, but how to fit ant what one?
By Reno RSS Feed in forum GENERAL ODDS N SODSReplies: 0Last Post: 26th May 2013, 03:30 PM