![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
Thread: Boswell Tig welder information
-
1st September 2013, 02:48 PM #1
New Member
- Join Date
- Sep 2013
- Location
- Coffs Harbour
- Posts
- 1
Boswell Tig welder information
Crampo
Newbie
Information on Bosswell tig 200amp.
Hi every one, Im a self taught welder, have used mig and stick ok. Now after advice from a boiler maker friend I've bought a Bosswell tig welder but don't know the first thing about tig.
We are welding thin alloy.
I need advise on how to set the settings on the machine, once I have the basic settings I hope I'll be right.
The instructions that come with the machine are not for the beginner and not very good anyway, I've checked on you tube and found Mr tig and Kevin Caron ( artist ) that explain the use of tig welders, the only problem there not the Bosswell machines that I'm using.
I would be very grateful for any advise and information I could get. If any one has any you tube videos that can help that would be grate as well.
Regards Crampo
-
2nd September 2013, 09:46 PM #2
Senior Member
- Join Date
- Dec 2010
- Location
- NINGI Qld Australia
- Age
- 68
- Posts
- 210
It would be helpful if you can supply a clear pic of your full control panel and exactly what thickness material you wish to weld. May be able to go from there.