Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2013
    Location
    Qld
    Posts
    1

    Default Hi from Sunny Widebay Burnett area QLD

    Hi, I’m an immature ‘woody’ and mainly into revamping stuffwe already own that needs revamping. Notsure where to post my question, I’m revamping a massive timber BBQ table withattached bench seats. Have totally strippedold varnish top /underneath and wooden bracing. Have then recoated all top areas with a Marine varnish, now I don’t havea lot left but do have a full tin of interior varnish leftover from previousjob.. Am I able to recoat all underneath areas and wooden bracing with theinterior then finish off with the exterior varnish with no adverse effects.

  2. #2
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day & Welcome to a top forum "peartree".
    There are a few members in & around the Hervey Bay, the Sunshine Coast & Brisbane..
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork.
    Cheers crowie

    Looks like the helpful mods has redirected your questions......

  3. #3
    Join Date
    Jun 2010
    Location
    Bundaberg
    Age
    54
    Posts
    160

    Default

    G'day Potentially Locally Located!

    There shouldn't be an issue puting exterior over interior varnish... unless they are seriously different. If you put nitro varnish over poly you'll probably get a very attractive crackle finish...

    Personally I prefer to either oil that sort of stuff, or make up a wipe-on/off varnish. One part varnish (most poly's are ok), one part gum turps and one part boiled linseed oil then you just rub it in with a rag and wipe it off again a quarter of hour afterwards. Do it a few times and the finish gets better and better. Plus when it gets scratched or faded you don't have to strip the whole lot again; just sand the affected area back (only if you really have to) and put on some more. Scratches in varnish look really obvious and then you'll get peeling and flaking in that area. If you savagely ignore an oil or wipe on finish and never touch it up or recoat it then the worst that happens is that the wood slowly starts to go silvery; just as if it was uncoated from the start, but over a longer period of time.

    This also means you get to stretch your varnish out a lot more; plus oil and turps are cheap.

  4. #4
    Join Date
    Jan 2011
    Location
    Ormeau, Gold Coast, Australia
    Posts
    203

    Default

    Gidday peartree & welcome aboard, may your journey be a pleasant one.
    Regards Rumnut.

    SimplyWoodwork
    Qld. Australia.

Similar Threads

  1. Hello from Sunny Brisbane
    By Flower9122 in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 5
    Last Post: 11th July 2013, 12:15 AM
  2. Hello from sunny Canberra
    By Cobralico in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 9
    Last Post: 8th July 2013, 04:30 PM
  3. Hello from sunny Werribee
    By Lum in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 7
    Last Post: 30th December 2010, 07:16 PM
  4. Hello all from Hot sunny Singapore
    By Xenophon in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 4
    Last Post: 26th October 2010, 11:53 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •