![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
Thread: G'day from Melbourne
-
24th August 2013, 11:40 AM #1
Intermediate Member
- Join Date
- Aug 2013
- Location
- Melbourne
- Posts
- 1
G'day from Melbourne
Hello there
I have done a reasonable amount of woodwork and metalwork over the years, nothing too fancy, but I am now very keen to learn how to use a metal lathe. I have not really had anything to do with a lathe since my apprenticeship, and even then it was quite limited.I have a Sheraton 9" model AR and have lots to learn.
Cheers
Peter
-
26th August 2013, 06:10 PM #2
G'Day & Welcome to a top forum "Peter".
There are a heap members in & around the Melbourne..
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP photos with build notes.
Enjoy the forum.
Enjoy your woodwork.
Cheers crowie
-
26th August 2013, 06:57 PM #3
Welcome to the forum. You might want to take a look at the metal work section of the forum. Click on the top of the page to get to the section.
-
26th August 2013, 07:00 PM #4
SENIOR MEMBER
- Join Date
- May 2011
- Location
- gippsland
- Posts
- 82
welcome Peter, enjoy the forum
regards
Joel
-
28th August 2013, 07:01 AM #5
welcome aboard Peter
-
28th August 2013, 08:46 AM #6
Gidday Peter & welcome aboard, may your journey be a pleasant one.
Regards Rumnut.
SimplyWoodwork
Qld. Australia.
Similar Threads
-
G'day from Melbourne
By justonething in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 6Last Post: 25th November 2012, 11:29 PM -
G'day from Melbourne
By tonymartin in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 5Last Post: 12th July 2011, 05:58 PM -
G'day from Melbourne
By BenW in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 13Last Post: 3rd April 2010, 07:16 AM -
G'day from Melbourne
By Wilson in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 6Last Post: 23rd February 2009, 10:11 PM -
G'day from Melbourne
By Bonsa1 in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 3Last Post: 9th August 2008, 05:59 PM