![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
16th August 2013, 12:20 AM #1
Isolating single brick veneer walls by pumping foam down the cavity
I wish to isolate all the walls (external and internal) with single brick veneer construction by pumping foam down the wall cavities.
I want the best possible acoustic (under Perth airport's flight paths on take-off for the 5-6am mining fly-in/fly-out flights) and thermal isolation. Just like an esky I would like to pump dense setting foam (polystyrene foam??) into the wall cavities from the roof space as I assume that foam is the easiest and cheapest way of doing it if I can source the appropriate equipment and materials. I do not want to have to pull off all the internal wall cladding to put bats in.
Any suggestions as to where I can source info on how to best do this and how to find the right equipment and materials would be much appreciated! Similarly if there is a better way of getting the best possible acoustic and thermal insulation please let me know.
Read the full thread at RenovateForum.com...
Similar Threads
-
DPC and Ant Capping in Brick Base Walls
By zacnelson in forum BRICKWORKReplies: 5Last Post: 10th May 2008, 10:57 AM -
Hoop Iron Specified in Double Brick Base Walls
By zacnelson in forum BRICKWORKReplies: 10Last Post: 11th April 2008, 06:53 AM -
using existing brick wall as brick veneer
By HaydnG in forum BRICKWORKReplies: 3Last Post: 28th August 2007, 11:59 AM -
Making a cavity in Brick Veneer
By Dunnie in forum BRICKWORKReplies: 3Last Post: 7th May 2006, 07:44 PM