Results 1 to 13 of 13

Thread: Chiselled!

  1. #1
    Join Date
    Feb 2005
    Location
    East Bentleigh, Melbourne, Vic
    Age
    68
    Posts
    180

    Default Chiselled!

    I'm not sure if I should be admitting this, but last Tuesday evening, after a trying day at the orifice, I thought I needed a bit of 'therapy' in the workshop.

    Well, I've been in the throes of making a roll-top desk, and needed to finish-up the elliptical trences in both upper sides that will take, eventually, the roll-top.

    Normally, I'm quite careful as to where I 'point' my chisels, but in coming to the end of the ellipse, I found the angle to be all wrong for me, so I just flipped the piece around.

    The long and the short of it is that the final section of maple (thankfully beyond the final edge that I want) just split, and even though I wasn't using much pressure, the chisel just went straight through, and into the Auld Bassoon's gut to the depth of about an inch...

    The chisel's fine, but the Bassoon's gut isn't

    It's amazing how much lint, shirt-material and wood chips get into such a little hole - or so the white-coated ones at the nearest hospital tell me. C'est un merde. Une grande merde!

    Three days off work, and it's still sore.

    Maybe it's just me being clumsy, but has anyone else had any similar nasties?

    Cheers!

    Steve B

    PS several large dollops of friendly red-juice later in the evening certainly helped

  2. #2
    Join Date
    May 2005
    Location
    Brisbane
    Age
    53
    Posts
    108

    Default

    Steve when it comes to hurting ones self I am normally good for a tale.

    but I'll bow out of this one................ you win!
    Specializing in O positive timber stains

  3. #3
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Serves you right, I intend useing a router to make the roll top groove in mine.
    Ouch.....:eek:

    Al

  4. #4
    Join Date
    Aug 2002
    Location
    Sydney, NSW, Australia
    Posts
    1,981

    Default

    Quote Originally Posted by Steve.Bisson@te
    Maybe it's just me being clumsy, but has anyone else had any similar nasties?
    Thankfully no.

    I always try to make sure that anything sharp points away from me.

  5. #5
    Join Date
    Feb 2005
    Location
    East Bentleigh, Melbourne, Vic
    Age
    68
    Posts
    180

    Default

    Quote Originally Posted by ozwinner
    Serves you right, I intend useing a router to make the roll top groove in mine.
    Ouch.....:eek:

    Al
    Don't ya just love sympathy....

    I'd thought about using a router, but, being an enthusiastic "wanna be", I wanted to (and still do, damn-it), try a wholly hand-built approach. No electrickery involved... Just wet, red, sticky stuff

    Cheers!
    Steve B

  6. #6
    Join Date
    May 2005
    Location
    Newcastle
    Age
    73
    Posts
    1,064

    Default

    Quote Originally Posted by Steve.Bisson@te
    Don't ya just love sympathy....
    Sympathy on this forum ha!!!!
    The only way you'll find sympathy look betweem merde and syphilis in the dictionary



    The trouble with life is there's no background music.


  7. #7
    Join Date
    Jun 2004
    Location
    Melbourne, South East Subs.
    Posts
    122

    Default

    Steve, seeing as you're so close, I should bring a healing ale around...but I'd make sure that new hole is well plugged, first. Wouldn't want any beer leaks on that new router table!

    Regards,
    Rusty.
    The perfect is the enemy of the good.

  8. #8
    Join Date
    Feb 2005
    Location
    East Bentleigh, Melbourne, Vic
    Age
    68
    Posts
    180

    Default

    Quote Originally Posted by Rusty
    Steve, seeing as you're so close, I should bring a healing ale around...but I'd make sure that new hole is well plugged, first. Wouldn't want any beer leaks on that new router table!

    Regards,
    Rusty.
    Tell you what Rusty,

    PM me a short list of your favourite watering-holes, ann maybe we could meet for a yarn or two?

    Cheers!

    Steve B

  9. #9
    Join Date
    Jun 2004
    Location
    Melbourne, South East Subs.
    Posts
    122

    Default

    Mate, I think there is only one pub around here...I'll drop you a line shortly!

    Regards,
    Rusty.
    The perfect is the enemy of the good.

  10. #10
    Join Date
    Apr 2002
    Location
    Brisbane
    Posts
    0

    Default

    Pictures, pictures, where's the pictures.

    how about this one.
    Any thing with sharp teeth eats meat.
    Most powertools have sharp teeth.
    People are made of meat.
    Abrasives can be just as dangerous as a blade.....and 10 times more painfull.

  11. #11
    Join Date
    Jun 2004
    Location
    Melbourne, South East Subs.
    Posts
    122

    Default

    That's a ripper, Soundman; I'm sure there's a perfectly reasonable explanation..

    Sad to report that having met Steve B. the other night he seemed to be recovering well, no gory wounds or hot nurses in attendance. The benefit of sharp tools is that lacerations heal nicely!

    Regards,
    Rusty.
    The perfect is the enemy of the good.

  12. #12
    Join Date
    Jul 2000
    Location
    Drop Bear Capital of Gippsland (Lang Lang) Vic Australia
    Age
    74
    Posts
    2,238

    Default

    I remember my little brother when he was about 12, holding a piece of wood in his palm and carving with the blade towards him, slip, straight into the wrist.
    Impressive spurt of blood, about a metre high, he thought it was funny, but he has always been a dickhead.
    Stupidity kills. Absolute stupidity kills absolutely.

  13. #13
    Join Date
    Apr 2005
    Location
    kyogle N.S.W
    Age
    50
    Posts
    0

    Default

    Quote Originally Posted by Iain
    I remember my little brother when he was about 12, holding a piece of wood in his palm and carving with the blade towards him, slip, straight into the wrist.
    Impressive spurt of blood, about a metre high, he thought it was funny, but he has always been a dickhead.
    yeh,,,,sounds like my brother two.....but of course he'd have reason to say the same about me ! the cheeky bugger

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •