![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Vacuum table prototype
-
20th July 2013, 12:42 AM #1
Vacuum table prototype
Here is the first prototype of a vacuum table
300mm x 300mm with 5mm slots
2013-07-19 17.32.04.jpg
It needs a couple of modifications before I cut it out of some 12mm plastic sheet
the slot was cut too deep so I will try some different variations on the weekend
Warrick
-
21st July 2013, 05:56 PM #2
No longer a prototype
video 2013 07 21 14 42 23 - YouTube
Warrick
-
23rd July 2013, 01:27 PM #3
Member
- Join Date
- Jul 2007
- Location
- Brisbane
- Posts
- 14
Hey Warrick,
Neat design - I like it a lot.
Just wondering what sort of vacuum / pump are you using?
Row.
-
23rd July 2013, 08:40 PM #4
Not sure what sort of pump, not very powerful. It was something my boss was going to throw out.
I think I will have to make it out of aluminium at a later date but this one has proved the concept
Warrick