![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 9 of 9
Thread: best finish to use on gun stock
-
5th July 2013, 11:28 PM #1
GOLD MEMBER
- Join Date
- Jun 2010
- Location
- shoalhaven n.s.w
- Posts
- 0
best finish to use on gun stock
hi all, hope to find out what the best finish to apply to a timber gun stock! if anyone has any recommendations as to what would be best, I was thinking danish oil?
-
6th July 2013, 12:34 AM #2
GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 42
'Boiled' Linseed oil. Flood it on, leave for a bit, wipe off. Repeat daily for a week or so until it builds up a 'surface'. Depending on use and storage you will need to repeat this as the finish continues to cure and to make up for any wear.
For a commercial finish 'Birchwood Casey' make a reasonable proprietary finish that should be available from some of the bigger firearms dealers, but I don't know if it can be mailed these days (may be considered 'flammable' or 'explosive').
IIRC most 'Danish oil' finishes are linseed oil and shellac, and they charge a considerable premium for basic ingreedients. So called 'Tung Oil Finishes' usually are much the same, no Tung oil, just linseed or some other 'drying' oil and a bit of shellac or polyurethane varnish - check the can carefully, it should say 'Tung Oil' and specify 'pure' or '100% Tung Oil', no mystery hydrocarbons or gobbledegook ingreedients.
Don't buy a large quantity expecting it to last either - the 'good oils' will polymerise in the can/jar once oxygen gets in there, so some will 'go off' even when unopened.
-
6th July 2013, 12:45 AM #3
China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 140
For a oil finish I use Tru -Oil, as wth any finish preparation is the secret to a high quailty finish
-
6th July 2013, 08:57 AM #4
Magnum Sports :: Cleaning/ Gun Care :: Birchwood Casey :: Wood Finishing Products :: Tru-Oil Gun Stock Finish
Magnum Sports :: Cleaning/ Gun Care :: Birchwood Casey :: Wood Finishing Products :: Complete Tru-Oil Gun Stock Finish Kit
Magnum Sports :: Cleaning/ Gun Care :: Birchwood Casey :: Metal Finishing Products :: Deluxe Perma Blue Liquid Gun Blue & Tru-Oil® Gun Stock Finish Kit
Can also be used on wooden stringed instruments.Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
7th July 2013, 01:33 PM #5
GOLD MEMBER
- Join Date
- Aug 2005
- Location
- Queensland
- Posts
- 613
The easiest way and arguably the best.
-
8th July 2013, 07:49 PM #6
+1 for Tru-Oil.
Steven.
-
10th July 2013, 06:13 PM #7
GOLD MEMBER
- Join Date
- Jun 2010
- Location
- shoalhaven n.s.w
- Posts
- 0
THANKYOU everyone! will post some photos when I get it sorted! think ive got 2 to do!
-
21st July 2013, 10:40 PM #8
Novice
- Join Date
- Jul 2013
- Location
- Victoria
- Posts
- 6
+4 for Tru-Oil although I always give the innards a couple of coats of waterproof clear coat first.
-
22nd July 2013, 12:32 AM #9
Banned
- Join Date
- Jul 2013
- Location
- Perth
- Posts
- 16
Birchwood Casey True Oil
+5 for Birchwood Casey true Oil - used it on my Anschutz Mod 1532 .22H about 35 years ago, and it's still going strong!.
Made the fiddle-back and tiger tail grain in the european walnut stock, shine like a dollar on a sweeps ass!
Cheers
Similar Threads
-
Walnut Rifle Stock Surface Preparation & Finish
By Rabbitz in forum FINISHINGReplies: 34Last Post: 28th October 2008, 08:08 PM