![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 7 of 7
Thread: Hey There. Newbie from Canada
-
26th June 2013, 05:26 AM #1
New Member
- Join Date
- Jun 2013
- Location
- Central Ontario
- Posts
- 1
Hey There. Newbie from Canada
My name is Dave and I live in East Oro, Ontario, Canada.
I have been reading up on dust Collectors and overarm blade guards since I took off about 19 mm of my left thumb three weeks ago on my tablesaw.
I joined your forum for the read of the generic 2hp dust collector to be able to see the diagrams and pics.
I must say it is taking me a bit to get around the lingo, but I am fascinated by the wealth of info available here.
I'm looking forward to learning much and broadening my horizons.
-
26th June 2013, 10:11 PM #2
G'day Dave
Welcome to the forum
Just a little late for guard on saw ......19mm late
Heaps of info on the forum.
If you cant find what your after just post a question
I'm sure you'll get answers
Again Welcome
Brian
-
26th June 2013, 10:14 PM #3
Welcome aboard Dave, hope you enjoy the journey (and your thumb recovers).
Regards Rumnut.
SimplyWoodwork
Qld. Australia.
-
27th June 2013, 08:40 AM #4
G'Day & Welcome "to the Great South Land" & to a top forum "Dave".
We have quite a few "canucks" on the forum; all trying to escape the cold..lol...
[There are quite a few good articles on Dust Collectors especially by "BobL"]
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP photos with build notes.
Enjoy the forum.
Enjoy your woodwork.
Cheers from On Top DownUnder, crowie
PS - Sorry to hear of your accident with the thumb......hoping the healing process goes well....
-
1st July 2013, 03:18 AM #5
welcome aboard
-
1st July 2013, 10:21 AM #6
Welcome
Hi Dave, welcome to the forums. Hope you enjoy them as much as I do. Heaps of great info here and some special WIP's to drool over. Don't worry about our slang, it's not that we want to confuse you, just the way it is. If you want a translation just ask, we are just the same in your world. When I was in Alberta over Xmas I found a lot of language variations that I had to ask about and I'm not talking about french either.
Cheers, from Oz. Ian
PS. sorry to hear about the thumb, hope it's healing up OK. Check this out, not cheap but I find it an excellent safety device, the 4" dust port was what triggered my initial interest. Cheers, Ian"The common law of business balance prohibits paying a little and getting a lot.. it can't be done.
If you deal with the lowest bidder it is well to add something for the risk you run.
And if you do that, you will have enough to pay for something better"
-
5th July 2013, 09:27 PM #7
Welcome to the forum. I hope things are better regarding your thumb.
Similar Threads
-
Hello from Canada
By northwood in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 11Last Post: 9th January 2010, 02:38 PM -
Hi from Canada
By phelpsr in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 8Last Post: 26th November 2008, 11:42 AM