![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Supporting large roof span
-
23rd June 2013, 11:30 PM #1
Supporting large roof span
Hi guys,
I am currently working on and Owner Builder Project and have encountered the following problem:
The plan is to remove most of the floor of the first story and build a new floor after. Therefore some interrnal walls have to go. The walls holding a conventional roof (terracotta tiles) and struts are resting on these walls.
Since we are obviously not able to just put props up we need a temporary beam for the span of 6.4m. The outer walls are double brick. Will 3 Timber beams (290x45) be sufficient or does it have to be steel? Or are there any other solutions out there?
Thanks in advance for any idea
Read the full thread at RenovateForum.com...