Results 1 to 9 of 9

Thread: Hi from Cairns

  1. #1
    Join Date
    Jun 2013
    Location
    Cairns
    Posts
    5

    Default Hi from Cairns

    Done a basic square coffee table in Tas Blackwood when I lived in Hobart and have also constructed stairs and kitchens.

    I recently bought a 300 kg Bloodwood outdoor table and bench for pennies (didn't suit the owner of a new house) and spent quite a few hours dismantling and finishing table. Has blackwood, oak and myrtle in the base. I want to sell it, she wants to keep it now... Finished with Danish oil and wax. Problem is the wax finish just marks, probably haven't applied it right...

    IMG_1010.jpg

    Picking up some dressed blackwood today to make a dining table, as well as a slab of cypress pine, about 50cm x 2m, so will see what I can do with that.

    Any advice on finishing the bloodwood table and the one I am about to start in blackwood would be very appreciated.

    Hello to all, I am a real newbie, but keen to learn and listen.

  2. #2
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day & Welcome to a top forum "Chris".
    You should find quite a few forum members in North Queensland.
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Very nice table you built.
    Make sure you keep showing off your handiwork as everyone loves a photo, especially WIP photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork.
    Cheers crowie

  3. #3
    Join Date
    Jan 2011
    Location
    Ormeau, Gold Coast, Australia
    Posts
    203

    Default

    Welcome aboard Chris, enjoy the journey.
    Regards Rumnut.

    SimplyWoodwork
    Qld. Australia.

  4. #4
    Join Date
    Jun 2013
    Location
    Cairns
    Posts
    5

    Default

    Quote Originally Posted by crowie View Post
    G'Day & Welcome to a top forum "Chris".
    You should find quite a few forum members in North Queensland.
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Very nice table you built.
    Make sure you keep showing off your handiwork as everyone loves a photo, especially WIP photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork.
    Cheers crowie
    Thank you so much Crowie. Have already realised mistakes in finishing table, so will keep reading about how to do it properly. Also bought a nice Bosch ROS today. Will post more pics as I progress my apprenticeship as am in expert company methinks...

  5. #5
    Join Date
    Jun 2013
    Location
    Cairns
    Posts
    5

    Default

    Quote Originally Posted by tdrumnut View Post
    Welcome aboard Chris, enjoy the journey.
    And thanks to you also tdrumnut. I appreciate the time you have taken to make me feel welcome

  6. #6
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Welcome to the forum. There is a finishing sub-forum on this forum take a look here; FINISHING

  7. #7
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,889

    Default

    Welcome to the forum

  8. #8
    Join Date
    Jun 2013
    Location
    Cairns
    Posts
    5

    Default

    Thanks JJF. Hope, in time, I can post advice to people as I have a lot to learn. Going to be somewhat passive until I feel I have something to contribute.

    When I start on dining table (blackwood), I will commence a project thread which I hope people will enjoy and provide advice as I go.

    Regards from sunny Cairns

  9. #9
    Join Date
    Aug 2010
    Location
    Horsham Victoria
    Posts
    1,142

    Default

    Chris, nice blackwood

    Welcome aboard

    If you want to meet a few from the forum and some from other places who share a passion for Wood Working you may like to check this out.

    https://www.woodworkforums.com/f25/ww...2014-a-170839/

    At this time it looks like we will have a variety of competent woodworkers there with skills in flat work, wood turning, carving and perhaps milling.
    Opportunity to spend one on one with some of these and whoever else is there and willing to share there time and expertise.

    Im hoping Neil from ubeaut will be there too, there will be plenty of good advice on finishing.

    The invitation for you and whoever comes - bring some tools, bring some wood (these are optional but desired if possible) you can sell, swap, work with it or just watch others.

    Mandatory if you come - a smile, willing spirit, desire to have fun learn and enjoy yourself.

    Hope to see you there, if cant make it we'll see you round the forum and who knows maybe at some other event

    Take Care

    DaveTTC

    Turning Wood Into Art

Similar Threads

  1. Cairns
    By smidsy in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 3
    Last Post: 12th April 2012, 08:08 PM
  2. Hi from Cairns FNQ
    By Ibanez in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 7
    Last Post: 26th October 2008, 08:40 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •