Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
-
5th June 2013, 07:17 PM #1New Member
- Join Date
- Jun 2013
- Location
- Toowoomba Qld
- Posts
- 1
Looking for a users manual for a Durden bandsaw
Hi,
Does anyone have a copy of the manual for the Durden bandsaw as shown in the attached photo?
Anything even close would be a great help.
Thanks
Durden bandsaw.JPG
-
6th June 2013, 09:14 AM #2Intermediate Member
- Join Date
- Oct 2011
- Location
- Camberwell Victoria
- Posts
- 14
Durden b1200 bandsaw
Hi, I have an original issue of the instruction book. I'll send you a photocopy if no other avenue available. PM your address or SMS to 0418307052. Melbourne.
-
8th June 2013, 10:20 PM #3
-
19th June 2013, 01:59 PM #4Intermediate Member
- Join Date
- Oct 2011
- Location
- Camberwell Victoria
- Posts
- 14
-
20th January 2014, 09:58 AM #5New Member
- Join Date
- Jan 2014
- Location
- Cashmere Queensland 4500
- Posts
- 2
Durden 1200 User manual
Hi Marco polo,
Am a new Forum member and also looking for a Durden User manual. If an cost involve please advise and will reimburse you.
Thank you Tonyy
-
20th January 2014, 09:50 PM #6New Member
- Join Date
- Jan 2014
- Location
- Cashmere Queensland 4500
- Posts
- 2
-
1st August 2014, 02:01 PM #7
Does any one know how to adjust the tracking on top wheel on the Durden Bandsaw? I cannot see how to do it at all.
Fortunatly the blade runs perfectly straight even when i put a new one on, but it would be good to know if I do need to adjust at anytime
I do not have any instructional booklet
Thanks
-
1st February 2021, 02:22 PM #8Intermediate Member
- Join Date
- Oct 2010
- Location
- Perth
- Posts
- 25
Thread necromancy time! I too have recently become a member of the Durden B1200 owners club and just starting out on the restoration process. Have ordered new tyres and thrust bearings for it but looking for the manual like everyone else. I see marcopolo hasnt been active for several years, did anyone else get a copy of the manual he had?
-
10th December 2023, 05:39 PM #9Senior Member
- Join Date
- May 2010
- Location
- FIFO to Pilbara
- Posts
- 114
manual located at : Durden B1200 bandsaw