Results 1 to 12 of 12
  1. #1
    Join Date
    May 2013
    Location
    Alexandra, Vic.
    Posts
    2

    Default Hi all from a newcomer - renovating the house, restoring the furniture

    Hi all, I'm doing a light touch renovation on my first home, learning some basic carpentry, and getting back into my love of restoring timber furniture. My next project is to make my own timber benchtops. Thought I'd buy lengths of some different species, butt join them in random order, sand sand and sand some more, and finish with clear polyurethane. I'm going for a look that's in between rustic country and retro milk bar - lots of white, splashes of aqua and just a pinch of red. I loved woodwork at school and am currently on the lookout for a short course in basic joinery so I can go from restoring furniture to making it, just simple pieces like console tables, shelving, etc.

  2. #2
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Welcome to the forum.

    Exactly how random as the top you make would also need to have consideration to the amount of wood movement.

    If it long grain to long grain or end grain to end grain that should be ok but when you have end grain to long grain it does have some consideration.

  3. #3
    Join Date
    May 2013
    Location
    Alexandra, Vic.
    Posts
    2

    Default

    Thanks Christos, good point. I think I'll lay the planks all the same way, to get a subtle stripe effect.

  4. #4
    Join Date
    Mar 2009
    Location
    Hobart
    Posts
    410

    Default

    Sounds like a lot of fun, I am well down that road albeit in restoring a very early colonial-regency farm house. One thing though I noticed in your original post re your bench tops. If I may make a suggestion, please re-consider the use of polyurethane. If you are looking for the country look and/or are going to make use of some nice timbers, such a finish is really the wrong material of choice.

    There are many better alternatives including tung oil, organoil etc. Poly finishes are so plastic in appearance, and once worn are aweful to work with. Basically you need to completely strip them back, whereas with tung oil etc all that is needed is a very occasional re-coat. They really are so much more friendly to work with and last well. They also give a more natural finish to your wood. Up to you of course but thought worth suggesting.

    Have fun and look forward to seeing some pictures if you can post them.

  5. #5
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Just keep in mind that different species have different expansion and contraction rates, so you might get gaps opening up over time.

  6. #6
    Join Date
    May 2013
    Location
    Alexandra, Vic.
    Posts
    2

    Default

    Thanks for the tips, tung oil sounds like a good idea, and perhaps I'll scrap the idea of using different types of timber - I want some character, but not gaps. Can anyone recommend a species that makes great benchtops? My floor is mountain ash with a touch of American oak stain in the first coat, but I'd like to "complement" rather than "match".

  7. #7
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,889

    Default

    welcome to the forum

  8. #8
    Join Date
    Aug 2010
    Location
    Horsham Victoria
    Posts
    1,142

    Default

    Welcome aboard. Hope I get to see this top when it is done. Sounds right up my alley.

  9. #9
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day & Welcome to a top forum.
    I think you'll find quite a few folk from the the Victoria on the forum and the rest of the world.
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork.
    Cheers crowie

  10. #10
    Join Date
    May 2013
    Location
    QLD
    Posts
    5

    Default

    I would not use tung oil for bench tops, it is toxic that is why I never use it for any of my turning, floors fine but for a bench top I would highly go against it.

  11. #11
    Join Date
    Mar 2009
    Location
    Hobart
    Posts
    410

    Default

    From my understanding let alone experience the comment re tung oil being toxic is incorrect. It is a natural oil extracted from the tung tree, and at most could be a problem for people who have allergies to nuts. Modern tung oil products have a stabiliser product added to it as natural tung oil when it hardens with a slight crinkle finish. Products such as Feast Watsons tung oil has some poly added to it. I have used this on my kitchen benches and bathroom vanity tops for years. The kitchen bench top at home was coated 11 years ago and only now needs some light rubbing back and re-coating. All my floors have been coated with similar finishes. It's good stuff.

  12. #12
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Tung oil is food safe.

    Source: Which Finishes Are Food Safe?, by Jonathan Binzen, Fine Woodworking, March/April 1998, Pg67

    Like any oil, some formulations may have metallic driers, but you'd have to be cooking with the stuff for this to be an issue.

    Tung oil may cause a minor reaction to people who are allergic to tree nuts. From the Sydney Children's Hospital Factsheet on Tree Nut Allergy:
    "There is no research to confirm that severe reactions can occur by touching or smelling tree nuts without nut ingestion."

    Tung oil is not listed in their run through, so the best I can offer there is that from a study published in the British Medical Journal in 1997, in a test group with known allergies to tree nuts, none of the test group had a reaction to tung nut oil that had been refined.

Similar Threads

  1. restoring outdoor furniture
    By ofr1 in forum RESTORATION
    Replies: 7
    Last Post: 16th July 2012, 10:42 AM
  2. restoring old furniture
    By burnabybear in forum FINISHING
    Replies: 3
    Last Post: 6th August 2010, 11:05 PM
  3. Help with restoring art deco furniture
    By Frank&Earnest in forum FINISHING
    Replies: 15
    Last Post: 12th May 2007, 06:47 PM
  4. Restoring English Oak antique furniture
    By dan_tom in forum FINISHING
    Replies: 3
    Last Post: 16th May 2005, 11:07 PM
  5. Renovating front door of house
    By chris.connor in forum FINISHING
    Replies: 1
    Last Post: 27th August 2004, 09:24 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •