![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
Thread: 2 pack Epoxy or one pack poly?
-
9th May 2013, 09:18 PM #1
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
2 pack Epoxy or one pack poly?
Our kitchen bench top is made of Oregon. It looked good when it was new some 18 year ago but it is now looking pretty ragged. I have sanded it and recoated it with two pack epoxy floor finish twice in the last 18 years and it has come up well both times. Ideally we should just replace it but I reckon it has at least one more go in it.
My question is what do folks think of the single pack poly as used for floors and what about the water based poly products. Will they be hard enough or should I just stick to the two pack epoxy?
Thanks
-
13th May 2013, 12:18 AM #2
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
Went with Estapol 7008 (2 pack polyester) as it is supposed to be one of the hardest wearing around.
Stinks a bit but only for a couple of hours and the smell drops significantly once it is touch dry (4 hours)
Here's what it looks like after one coat.
It only comes in high gloss so I will be cutting it back to a satin/matt finish with fine steel wool after the last coat.
Have put three more coats on since.
Will take a pic once it is all done.
-
13th May 2013, 03:35 PM #3
GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Perth WA
- Posts
- 355
So I guess thats one off the bucket list
. Yes I would have went for the 7008... and the thinners to get high on.
Completely off topic Bob, have you heard anything from Alex B and what he might be doing this year?Experienced in removing the tree from the furniture
-
13th May 2013, 09:14 PM #4
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
Not totally off my plate yet, still have to cut it back with the steel wool and move all the crap back.
While moving the very expensive fully plumbed in coffee machine I discovered its base was rusty - more repairs - will it ever stop.
Just another penalty of owning too much crap I guess.
Completely off topic Bob, have you heard anything from Alex B and what he might be doing this year?
-
22nd May 2013, 12:09 PM #5
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
Benchtop is done, It doesn't look like it but the finish is quite matt.
It's also tough and a bit flexible which is needed for s soft timber like Oregon.
We're very happy with it and it should last a while.
Panorama shot didn't quite turn out as well as I wanted - I will drag out the panoramic tripod head and see what I can do.
-
22nd May 2013, 04:05 PM #6
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
HEre is one taken with the tripod panoramic head.
KitchPanorama2p.jpg
Similar Threads
-
Aquamax 2 pack water based poly
By Wongo in forum FINISHINGReplies: 0Last Post: 2nd May 2012, 11:35 PM -
Two Pack Epoxy Concrete Paint
By Reno RSS Feed in forum CONCRETINGReplies: 0Last Post: 4th July 2009, 09:20 PM -
Two pack poly that looks like Danish Oil
By rsser in forum FINISHINGReplies: 19Last Post: 23rd March 2008, 03:46 PM -
one pack poly
By Zed in forum FINISHINGReplies: 5Last Post: 1st October 2003, 07:31 AM