Results 1 to 6 of 6
  1. #1
    Join Date
    Apr 2013
    Location
    Geebung, 4034
    Posts
    2

    Default Good day from sunny Brisbane.

    Hi my name is Jerry and I am from Pietermaritzburg, South Africa. I immigrated to Brisbane in August 2008. I am a qualified carpenter( concrete form work) though I left that type of work immediately after my apprenticeship to get into the finer work of carpentry.it was not until 1989 that I joined a shopfitting company and started doing cabinetmaking, shopfitting,joinery,solid surfacing and aluminium fabrication. Its always been my dream to build model ships as I have the skills to do it instead of been a collector. I have most of the regular carpentry tools and been given a mini band which can be used for scrolling and a flip over ELU drop saw. The ELU is missing the fence and the height adjustment wheel and I am wondering if anyone out there knows where I can get these parts. I happened to stumble onto this forum whilst looking up tools on Gumtree and have not have to much time to peruse the forum yet, but am sure it will be of benefit to me.

  2. #2
    Join Date
    Jan 2011
    Location
    Ormeau, Gold Coast, Australia
    Posts
    203

    Default

    Gidday Jerry welcome to the forum, just as well you didn't post this yesterday or you would have needed a different title, enjoy your stay.
    Regards Rumnut.

    SimplyWoodwork
    Qld. Australia.

  3. #3
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day & Welcome to a top forum "Jeros".
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork & a very beautiful part of the world.
    Cheers crowie

  4. #4
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Welcome to the forum. Take a look around the forum as you will find the sub-forum that you might be able to post questions on the restore of your ELU drop saw.

    Currently I would suggest to post it here, GENERAL & SMALL MACHINERY

  5. #5
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,889

    Default

    Welcome to the forum

  6. #6
    Join Date
    Apr 2013
    Location
    Geebung, 4034
    Posts
    2

    Default Thanks Christos

    Quote Originally Posted by Christos View Post
    Welcome to the forum. Take a look around the forum as you will find the sub-forum that you might be able to post questions on the restore of your ELU drop saw.

    Currently I would suggest to post it here, GENERAL & SMALL MACHINERY
    Thanks Christos for that helpful tip on the refurbishment of my ELU drop saw. I will go check it out. Thanks to everyone for the warm welcome.

Similar Threads

  1. G'day from Brisbane, the sunny state, although it rained last night
    By AdmetusNotus in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 6
    Last Post: 3rd June 2010, 02:06 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •