Results 1 to 7 of 7

Thread: G'day Guys

  1. #1
    Join Date
    Apr 2013
    Location
    Brisbane
    Posts
    0

    Default G'day Guys

    Hi Guys, The Name's Rhys and I'm from Brisbane. I just bought my first wood lathe since highschool (almost 20 years ago). Im looking for some interesting ideas to try. I made my first pen on my father in-laws lathe a few weeks ago and If I must say i was pretty successful. Unfortunatley when I tried to make my own stylus from a piece of grevilia I wasnt so successful. My plan was to turn down a tube on the lathe and insert a cheap stylus i bought from a junk store down the midde. I was plauged by problems to do with my bore hole being off center and then shaping the tube too thin on one side. can anyone suggest a way I could retro-fit a 1/4 inch pen mandrel to suit an 8.5mm bore hole, whilst keeping everything centered.

    Many thanks Guys

    Rhys

  2. #2
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    77
    Posts
    0

    Thumbs up

    G'day Rhys and welcome to the show!! good to see you have a lathe and are ready to go!!!

    What sort of lathe did you get??

  3. #3
    Join Date
    Jan 2011
    Location
    Ormeau, Gold Coast, Australia
    Posts
    203

    Default

    Gidday Rhys welcome to the forum, enjoy your stay. What part of Brissy are you from?
    Regards Rumnut.

    SimplyWoodwork
    Qld. Australia.

  4. #4
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day & Welcome to a top forum "Rhys".
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork.
    Cheers crowie

  5. #5
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Welcome to the forum.

  6. #6
    Join Date
    Apr 2013
    Location
    Brisbane
    Posts
    0

    Default

    I bought a Woodfast WL305 from carbatec. Not the biggest unit on the market but it'll do me to get started again. I'm from Hemmant mate, not far from wynnum.

  7. #7
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,889

    Default

    Welcome to a forum

Similar Threads

  1. G'day, guys - from Nowra NSW
    By Hermit in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 10
    Last Post: 19th February 2012, 10:02 PM
  2. G'day guys, hows things
    By rotten in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 6
    Last Post: 10th October 2011, 07:44 PM
  3. G'day Guys & Girls
    By OzBuzz in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 8
    Last Post: 12th April 2010, 01:10 PM
  4. G'day guys and girls
    By trav-ke55 in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 5
    Last Post: 2nd March 2009, 09:22 AM
  5. G'day guys, need some tips milling iron bark.
    By Morgan in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 5
    Last Post: 23rd January 2009, 06:23 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •