Results 1 to 8 of 8
  1. #1
    Join Date
    Mar 2013
    Location
    Southern River Perth WA
    Posts
    3

    Default Hi Southern River Perth WA

    Hi I'm David, I joined a few weeks ago and thought that it was time that I introduced myself. I'm a motor mechanic and I am a bit over working on cars all of the time so I'm looking to getting back into woodworking again especially wood turning. I have a 1952 10ER Shopsmith that my Dad bought brand new and it was passed onto me 11 years ago. In very good usable condition but need a cosmetic upgrade. Recntly over the last 3 weeks I bought an old Tough drill press (floor model) and an older Tough wood lathe to compliment the Shopsmith. The 2 Tough machines are both 3ph I will have to work out what to do about that. I will post some photos later. That is all for now. Cheers David Y

  2. #2
    Join Date
    Feb 2009
    Location
    moonbi nsw Aus
    Age
    70
    Posts
    228

    Default

    Welcome aboard Dave. There is always room for one more. Any questions you have regarding anything can be answered right here. There are a number of very talented Forumites in your neck of the woods who would be happy get you going. Your mechanical knowledge may be of use to someone else, so you could give consultantary(?) help to them.
    With such a broad base of knowledge within the Forum just reading these threads will keep you amused also.
    Looking forward to seeing your shed "take off"
    Just do it!

    Kind regards Rod

  3. #3
    Join Date
    Jan 2011
    Location
    Ormeau, Gold Coast, Australia
    Posts
    203

    Default

    Gidday David welcome to the forum, enjoy your stay.
    Regards Rumnut.

    SimplyWoodwork
    Qld. Australia.

  4. #4
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day & Welcome to a top forum, David.
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork
    Cheers crowie

  5. #5
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,889

    Default

    welcome to the forum

  6. #6
    Join Date
    Mar 2013
    Location
    Southern River Perth WA
    Posts
    3

    Default

    Hi, Thanks for your kind greetings. I'm looking forward to getting my machinery going so that I can make a decent start and make some saw dust, Cheers David

  7. #7
    Join Date
    Jan 2013
    Location
    Kalbarri, Western Australia
    Posts
    7

    Default

    Welcome David, From Kalbarri, WA.

    It is possible to buy converters to change single to three phase for your machines, I know nothing about them, except that they exist.

    Hope you can get into some decent turning activity and make lots of saw dust and shavings.

  8. #8
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Welcome to the forum.

Similar Threads

  1. Southern Gentleman
    By Barry Hicks in forum JOKES
    Replies: 1
    Last Post: 29th June 2008, 03:07 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •