I need Spraying Nitrocellulose Lacquer Secret

[Arron]

I've sanded it back to almost smooth so hoping that the extra coats will level it out a bit when I have another go in the morning.
..

Another tip is that when you've messed up and have a rough surface or an obvious flaw then you can use pullover to smooth it out. You put a mix of lacquer, thinners and meths in a jar, and use a rag or a rubber to flatten the surface. Just pull the wet rag across the surface. Adjust speed and wetness to get the surface melted and able to be pushed/pulled around. I think its generally better then sanding as less damage is done.

Good for grain filling too.

Arron

[_fly_]

This has got to be the best thread in ages and I only had to ask the questions.
Michael Parkinson watch out, here I come.

Seeing today is a little bit cooler I am going to spray terps onto the spider webs all around the garage door.
That way I can get used to what all the knobs do and work out what knobs affect (or is it effect) what.

Thanks all for the fantastic advice given so freely.

Peter

[Cliff Rogers]

... I am going to spray terps onto the spider webs all around the garage door.....

Use white vinegar instead, the cheap cleaning stuff, not so dangerous.

[Dengue]

Great thread, thanks for sharing all your experiences and preferred methods