Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 2 of 2
  1. 2nd March 2013, 06:07 PM #1
    WelderMick
    WelderMick is offline SENIOR MEMBER
    Join Date
    Feb 2010
    Location
    Ballina, NSW
    Posts
    725

    Default Plasma cutting info

    It's rainy today, so I've been doing some reading. I came across this informative info-brochure on plasma cutting for those of you with an interest. http://www.boc-gas.com.au/internet.l...y351_68107.pdf. Page 27 has a little symptom/solution trouble shooting chart for the uninitiated.
    Cheers
    - Mick
  2. 4th March 2013, 02:12 AM #2
    LordBug
    LordBug is offline Tool addict
    Join Date
    May 2008
    Location
    Perth
    Posts
    163

    Default

    Looking at some of the images throughout that document makes my results feel absolutely amateur in comparison
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules