![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
Thread: cc/cv wire feeder
-
16th February 2013, 12:10 PM #1
dave the plummer
- Join Date
- Nov 2009
- Location
- adelaide
- Posts
- 26
cc/cv wire feeder
ok, what are the tricks when you're running an LN25 or similar feeder on CC generator sources, specifically out of position with 3xp or 71mx.......found a couple cheap gen/welders, but they have no cv function......
-
16th February 2013, 11:25 PM #2
GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 2,956
Hi, contact WESS at Cormack Rd Wingfield, they should be able to help you with any questions.
Kryn
Similar Threads
-
Bird feeder help
By LHoneyman9913 in forum FINISHINGReplies: 1Last Post: 19th October 2012, 06:54 PM