How to spray shellac

[Dengue]

I have a bottle of Ubeaut white shellac that I would like to try spraying with a small touchup gun on some small pieces.

Can anybody please advise how I should thin it, what ratio, and how to clean up the gun afterwards?

Also, do you need to sand between coats, and what is the drying time?

I appreciate all suggestions and ideas,

[Cliff Rogers]

There are a couple of threads on the subject already, have a look at these.

https://www.woodworkforums.com/f9/she...ay-gun-125787/

https://www.woodworkforums.com/f9/spr...shellac-73153/

https://www.woodworkforums.com/f9/noz...shellac-49015/

https://www.woodworkforums.com/f9/spr...shellac-33613/

[The Bleeder]

Thin it with industrial metho. As to ratio....depening on the tempature...humidity....yes

It's not as easy at it sounds/looks (with our changing weather)....but yes it is achievable. Try on test pieces before you start.

Between coats 0000 steel wool.