![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 16 to 30 of 53
Thread: Hunter forumites gtg
-
21st January 2013, 07:35 AM #16
-
26th January 2013, 04:01 PM #17
Sorry unable to attend this one due to a State meeting of the NSW Rose Society being also held in the Hunter. Have fun maybe next time
Sam
-
26th January 2013, 10:34 PM #18
-
27th January 2013, 08:30 AM #19
-
28th January 2013, 08:22 PM #20
This would be nice to meet some of the Hunter woodworkers, however I have already been booked to be away. Hopefully next time.
Cheers
Dwayne
-
4th February 2013, 07:16 PM #21
Hey Woodnut can we get some info like
start time what to bring that sort of stuff
thanksDANGER!!!!I'm Dyslexic Spelling may offend!!!!!
-
4th February 2013, 08:14 PM #22
Well I have had a few delays
, but I am on my way tomorrow
, unless some thing else goes wrong
So much for the slow casual trip down, only just enough time for one night at each stop now. The big burl at Nabiac will have to wait, no room in the trailer anyway, next trip maybe or perhaps on the way back
Neil____________________________________________Every day presents an opportunity to learn something new
-
4th February 2013, 09:20 PM #23
-
5th February 2013, 09:02 AM #24
I've got an extra, heavy yellow thingie, I'll blame it all on that
.
This trip was a trial, I wanted take what I might need for a longer trip, so it has quite a few blanks/kits/market set-up etc on board. See https://www.woodworkforums.com/f119/a...ady-go-165722/ for a few issues I've had with the load.Neil____________________________________________Every day presents an opportunity to learn something new
-
6th February 2013, 01:04 PM #25
I haven't met any of you, but would like to.
May I come in the morning for a few hours as I have a commitment in the arvo?
Lyle.
-
6th February 2013, 02:03 PM #26
Of course Lyle. All are welcome.
See you on Saturday
-
6th February 2013, 02:14 PM #27
I am just checking but I can't remember see the address to go to ? am I blind
Or is it one of those parties where all are welcome but we arn't telling you where it is
Cheers Ian
-
6th February 2013, 03:58 PM #28
Hunter forumites gtg
Hi all,
Been away from the computer for a while, but the address is no secret Dorno (Just spoke to Ray/Wheelin and it seems we might all catch up on the Sunday of the Artisan's on the Hill Open Days!).
I did send NCArcher some details and he was posting them to Hunter Members but I will send some pm's with further info - there are also some coming from Sydney - Ross and NZCarver who likes to travel!
Definites at this stage:
Wood Nut (I'm sure to be home)
Dai Sensei (Assuming he has no more flood/car/trailer/tooth problems
NCArcher
Dorno
Lyle
nz_carver
Ross
Pilchard
Scally
A mate from the Woodturners of the Hunter (+wife)
chief012
Not Sure:
spectacle43
Would like to but unavailable:
Ashore
wheelinround
richmond68
Simomatra
Dwano
Hughie
Please let me know ASAP if there are others so I have some idea of numbers.
Pm's to follow soon with details.
Cheers,
Paul
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 , 0
wheelinround liked this post
-
6th February 2013, 05:46 PM #29
Glad your ok Paul these old blokes were beginning to worry I mean two or is it three days away. Someone asked had you gone to rescue Niel by boat or punt maybe just so he could make.
-
9th February 2013, 09:36 PM #30
Ok
I heard that something went down
where's the piccy's?regards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 , 0
Similar Threads
-
Hello forumites
By naraul in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 5Last Post: 9th January 2009, 01:34 PM
Bookmarks