![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Which exterior plywood to use?
-
30th January 2013, 10:00 PM #1
Which exterior plywood to use?
Hi all,
I need to square up some round patio pillars. Basically just box them in the entire height up to the eves. The pillar diameter is approximately 200 mm. Then I plan to tile them. The pillars are under the eves but are exposed to the weather. The lower part of the pillars get wet every time it rains. I was looking at 18 mm plywood to use as boxing as it suits future plans to enclose the patio. My question is which plywood to use? Marine,Film face, exterior? I obviously need something that's stable under moisture but can be tiled over. Any thoughts?
Cheers, Brad.
Read the full thread at RenovateForum.com...