![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
-
20th January 2013, 10:47 PM #1
New Member
- Join Date
- Jan 2013
- Location
- Narre Warren
- Posts
- 1
Repairing another warped table top
Hi All,
This is my first time at these forums after searching the internet for some time answers I thought I would post my problem and hope some experts out there would be able to provide me (an amateur hobbyist) some guidance on how I might be able to fix the warping from my table.
I don't know much about the history of the table, I recently picked the table up for a bargain price (debatable given that its warped, but I really like the legs).
In the pictures, you can see that the front right side seems to have dropped in comparison to the rest of the top. And to a lesser degree, the left front and right back have risen. The black frame attached to the top seems to have warped with it. I've also included a photo of the joinery under the table in case this is of interest.
2013-01-20 22.20.54.jpg2013-01-20 22.21.37.jpg
2013-01-20 22.23.23.jpg2013-01-20 22.25.08.jpg
And sorry, I'm only a very amateur hobbyist so a translation to laymen terms for any technical words/techniques would be appreciated.
Many thanks for taking a look at this.
Cheers
Mike
-
20th January 2013, 11:33 PM #2
The most serious warp appears to be the table top itself; I'd hazard a guess that it's been stored somewhere where the top got lots of light and heat. It might flatten itself out all by itself, or it might do so with a little encouragement by misting the top with water over a few days/weeks, or it might need re-jointing (cut apart at the joins, square up all the timber, re-glue as a flat top).
The rest of the problems (crocked leg attachment) are probably just due to glue failure or poor joint design or overloading.
-
21st January 2013, 12:03 AM #3
GOLD MEMBER
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 408
I think your problem is heat, with a load on one side.
I have a similar problem with a round tasmanian myrtle pedestal table that has warped appreciably. Part of it was near a hot spot for circa 6 months, with a heavy load (20 kg??) on one side of the table. I may have to rehydrate it and have it in a cooler part of the house for a few months, and see what happens.
Similar Threads
-
Repairing a Warped Table Top
By Pinex in forum FINISHINGReplies: 23Last Post: 1st February 2013, 05:52 AM