Page 2 of 2 FirstFirst 12
Results 16 to 25 of 25
  1. #16
    Join Date
    Aug 2004
    Location
    Sunbury, Victoria, Au.
    Posts
    0

    Default

    Quote Originally Posted by AngelaPetruzzi View Post
    It may be an idea to check the part re Tung oil being food safe, even when dry.
    It is a sensitizer to many with sensitivities and being derived from “nuts” watch out for those with nut allergies.
    That's a good point Angela! We have to look hard at what finishes we use these days with the types of sensitivities that have been identified.
    Russell (aka Mulgabill)
    "It is as it is"

  2. #17
    Join Date
    Jun 2012
    Location
    Mosgiel New Zealand
    Posts
    0

    Default

    I have one made of rimu 13yrs old its had a couple of resands and a good coat of canola oil rice brand is ok as well dont use an oil like olive as it can go rancid and taint the food ,U beaut food safe should be ok. In my opinion i woulnt fill it get another piece and make somthing ellse with the cracked piece but thats just me

    Cheers Ian

  3. #18
    Join Date
    Jul 2008
    Location
    Melbourne
    Posts
    7

    Default

    Be aware that detergent will disperse oil quite effectively so if you coat your board with parafin oil or similar you can expect it to disappear after washing it in the sink. And you will need to wash your board if you are using it to chop meat. I have used parafin oil and it is safe and looks good, but only until you wash the board! I don't bother with the oil now now and the board looks fine. It is a chopping board so cuts and marks are to be expected, and you can naturally expect any finish you have applied to be degraded accordingly.

  4. #19
    Join Date
    Feb 2008
    Location
    Nebo, Central Queensland
    Age
    53
    Posts
    6

    Default

    I had found a US uni did some tests and they basically found mineral oil or paraffin oil kills the timbers natural antibacterial properties. It is posted on the forums somewhere here.
    Cheers

  5. #20
    Join Date
    Dec 2008
    Location
    Atlantic, Iowa, USA
    Posts
    1

    Default Cabot 8099 Tung Oi

    Does anyone know if Cabot 8099 tung oil is food safe. I have just been requested to make a cheese board for Christmas Eve.
    I have a scrap of walnut to start with.
    Thanks,

    Nigel.

  6. #21
    Join Date
    Aug 2007
    Location
    Melbourne
    Posts
    110

    Default

    Quote Originally Posted by Nigel Chivers View Post
    Does anyone know if Cabot 8099 tung oil is food safe. I have just been requested to make a cheese board for Christmas Eve.
    I have a scrap of walnut to start with.
    Thanks,

    Nigel.
    Hi

    Nigel and welcome,
    So it's the 22nd December there right?

    You would be better to use a product which says "Pure Tung Oil" or "Pure China Wood Oil."
    Liberon make pure Tung Oil. You would be best to dilute it down 1:2 with White spirits then apply.
    If you can use this method, you will have a dry food safe oiled surface by 12/24.

    If you just apply it then let it dry, it may not be food safe come Christmas eve. In this situation, it needs at least 48 hours to cure and become food safe.

    Regards and Happy Holidays,

    Rob

  7. #22
    Join Date
    Jun 2012
    Location
    Mount druitt
    Posts
    0

    Default

    I don't know what equipment you have in your shed,but if you have a router can you cut out the cracked section out say with a square trench cut bit, and then cut a piece from one of the slabs that are cracked all the way through,if you cut it a bit oversize you could sand it to a tight fit and glue it into place.You may be able to fit it in such a way that it would be a highlight

  8. #23
    Join Date
    Aug 2008
    Location
    Normanhurst NSW 2076
    Age
    82
    Posts
    0

    Default foodsafe finishes.

    Hello,
    The foodsafe finish - woodwipe - is a citrus and nut oil base. If people have nut allergies it could be a problem.
    Having said that it is really good. The health safe finish is paraffin oil (medical standard) bought for a few dollars
    at your local chemist. Sometimes referred to as mineral oil. About every 6 months or so I touch up our chopping boards and wooden utensils with it.
    It is a fail safe and does not have the pungent smell of woodwipe. The problem with Tung Oil is that you have to make sure that it is
    100% pure. If it has additives then maybe it isnt foodsafe. Drillit.

  9. #24
    Join Date
    Jan 2006
    Location
    Canberra
    Posts
    1

    Red face There are many alternatives form nothing upwards

    I've been making cutting boards and cheese plates for some years and the better they look at the start the more the receiver/buyer wants them to stay that way. Doing nothing is a good option and the board will age gracefully with use.

    If you or the owner want the board to continue to look good and be safe there are some simple rules/options. Never cut meat on the same board as anything else. Sterilise the board from time to time by washing in warm soapy water then apply a layer of salt, rub it in and leave it for a while. Rinse the salt out. Leave to completely dry before use.

    I always oil my boards. I have used Woodwipe mentioned elsewhere - its good (except for the nut issue). Howards sells "Butchers Block Oil" - also good. I now use Kunos Oil,a available from Natural eco paints, oils & products, healthy choice to acrylic & polyurethane - Livos Australia or if you live in or near Canberra they sell it in small jars at the Bungendore Woodworks. Easy to use and completely food safe and can add a shine to the new bord that other oils will not match. Mineral oil is also good, from your chemist or from U-beut. Not expensive and is safe.

    The one thing I do tell my customers is not to re-oil with any vegetable/olive oil except grapeseed oil. My research cautioned that these oils can become rancid over time.

    Never had a complaint.

  10. #25
    Join Date
    Jun 2010
    Location
    shoalhaven n.s.w
    Posts
    0

    Default

    hi all I do a few chopping boards this is what I use gluing titebond with the blue label as its food safe and butchers block conditioner as its meat safe, and food safe plus on wooden spoons

Similar Threads

  1. finishing a chopping board
    By Torre in forum FINISHING
    Replies: 15
    Last Post: 18th May 2008, 02:43 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •