Results 1 to 4 of 4
  1. #1
    Join Date
    Apr 2009
    Location
    Melbourne
    Age
    53
    Posts
    240

    Default How should I fill these holes....??

    I took apart a cabinet I'm restoring, unfortunately some of the vaneer came away when the bottom dropped to the floor (see photo's)... Can anyone lend a helping hand and tell me how to go about filling the holes (what filler to use) and making it all nice and smooth again. The cabinets going to be painted black so I'm not worried at all about what it looks like as long as its smooth and any filler wont drop out.

    Many thanks

    IMG_0535.jpgIMG_0538.jpg

  2. #2
    Join Date
    Dec 2010
    Location
    Melbourne
    Age
    80
    Posts
    36

    Default

    I would use builders bog,it will cure quickly so you can apply some, sand it,apply more till you get those holes filled,it does not shrink sands well and paints up ok.
    Rough up the bottom of the holes to help key the filler(no matter what you use)
    Last edited by nrb; 31st December 2012 at 09:58 AM. Reason: extra comment

  3. #3
    Join Date
    Apr 2009
    Location
    Melbourne
    Age
    53
    Posts
    240

    Default

    Quote Originally Posted by nrb View Post
    I would use builders bog,it will cure quickly so you can apply some, sand it,apply more till you get those holes filled,it does not shrink sands well and paints up ok. Rough up the bottom of the holes to help key the filler(no matter what you use)
    Hi nrb, I think I'm going to go with this idea. I was going to plastic wood but I think you're idea is much better. thanks again

  4. #4
    Join Date
    Mar 2007
    Location
    Canberra
    Age
    73
    Posts
    52

    Default

    Yep - two-part epoxy/ polyester is the go. Although you could get some veneer and glue into place then fill the remaining gaps, so reducing the area needed to be filled and sanded level. Depends on what quality you are after - both would work.

Similar Threads

  1. To Fill or Not to Fill
    By Bledrin in forum FINISHING
    Replies: 33
    Last Post: 16th September 2009, 03:43 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •