![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
Thread: G code
-
25th December 2012, 11:05 PM #1
G code
I was on a forum the other night and they had a thread for G codes where you can post for people to use all for free. The only problem that I see is that the size of the CNC that it was done on and the tool size. I think the nc from your program like VCarve would be a better idea so that you can change things to suit you. Would any one like to give this a go.
Davidgiveitagoturning @hotmail.com
-
26th December 2012, 10:44 AM #2
Intermediate Member
- Join Date
- Jan 2009
- Location
- Gundaroo
- Posts
- 12
Certainly worthwhile having a look at dj.
Cheers
Kim