![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
Thread: How to treat final poly coat?
-
24th November 2012, 09:55 PM #1
How to treat final poly coat?
I'm a finishing n00b and have been skilling up by finishing a table I made at TAFE by spraying on satin poly over a black japan stain/varnish (not REAL BJ) and now that I'm up to the final coat I'm a little stuck with how to be left with a nice smooth to the touch finish.
Sometimes I've been left with "stubbly" areas that look like they've come from overspray that hasn't flattened out and although I've tried different methods and orders of spraying I still get them here and there. (And let's not talk about the $%!^#$@ bugs)
Between coats I've been giving it a rub with #0000 steel wool which is leaving a nice feel but with visible scratches.
How can I be rid of those stubbly bits on my final coat without leaving scratches? Will EEE do it without leaving visible marks? Does the remaining wax hide the scratches? Do I need to sacrifice a goat to the finishing gods?
Cheers
-
25th November 2012, 10:26 PM #2
Senior Member
- Join Date
- Sep 2012
- Location
- Oz
- Posts
- 0
I think the goat is the answer.
I use wipe-on poly rather than spraying, but to get the best finish I rub the final coat with 1200G W&D, then finish up with wax.
That might take care of your 'orange-peel' problem.
Similar Threads
-
Dust on the final coat of enamel
By HTM in forum FINISHINGReplies: 12Last Post: 11th May 2009, 08:34 PM -
1:) Danish with poly and 2:) Poly over white/hard shellac ?
By barryr in forum FINISHINGReplies: 6Last Post: 6th August 2005, 02:11 PM