Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
9th November 2012, 07:25 PM #1Senior Member
- Join Date
- Nov 2003
- Location
- Melbourne, Australia
- Posts
- 95
Need help to find O-ring Belt for Sher Multifunction Drill Press
MutifuctionDrillPress.png
Hi
I have a "Sher Power Tools" model BPOSC5 Multifunction Drill Press for years. Looks like Craftsman's in picture.
I been able to replace the v-belt (from auto spares) but unable to find a replacement nylon O-ring type belt that is used to oscillates the spindle up and down for drum sanding.
Does anyone knows
1. Who is the agent for Sher Power Tools in Australia?
2. Where can I find a substitute belt.
The Singer Sewing machine motor "stretch belt" is similar but unfortunately too long in terms of circumference. I may splice a sewving Machine Belt if I can find a correct length belt.
Belt thickness is 5mm diameter. Circumference of o-ring about 24cm
Thanks in advanceReuel
-
10th November 2012, 09:27 PM #2China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 3,150
Places such as CBC bearings sell it by the metre, just cut to length and glue with a industrial grade super glue
-
11th November 2012, 08:47 AM #3Senior Member
- Join Date
- Nov 2003
- Location
- Melbourne, Australia
- Posts
- 95
-
11th November 2012, 10:44 AM #4
industrial SUPERGLUE will be and do a better job, the rubber glue from CLARK RUBBER , will not be strong enough for your application due to a couple of factors,
1 lack of contact area
2 industrial "O"ring material is made to be chemical resistant, so it will not soften &fuse with adhesives.
jeff
vk4
-
12th November 2012, 05:30 AM #5Senior Member
- Join Date
- Nov 2003
- Location
- Melbourne, Australia
- Posts
- 95
-
12th November 2012, 09:42 PM #6China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 3,150
CBC will most likely have suitable ahesive, Clark rubber are not suppliers of industrial products, if not CBC I would Blackwoods or simillar
-
13th November 2012, 07:08 AM #7Senior Member
- Join Date
- Nov 2003
- Location
- Melbourne, Australia
- Posts
- 95
-
15th November 2012, 01:06 AM #8GOLD MEMBER
- Join Date
- Sep 2010
- Location
- Lebrina
- Posts
- 1,099