Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: The Polishes ?.
-
3rd September 2012, 08:45 PM #1
Deceased
- Join Date
- May 2008
- Location
- BELL POST HILL, 3215
- Age
- 87
- Posts
- 621
The Polishes ?.
Hi to you all,
Have a small Problem.
I use an Acrylic People Guard for my Small Lathe.
How ever it is covered in Neil's Polish. I know not to use Mineral Turps as it will go all Frosty/ Cloudy.
Metho doesn't have much affect either.
The Question is ; " What would you use " as I would like it Clearer to see through, & see who I am talking too.Regards,
issatree.
Have Lathe, Wood Travel.
-
4th September 2012, 08:49 PM #2
Deceased
- Join Date
- May 2008
- Location
- BELL POST HILL, 3215
- Age
- 87
- Posts
- 621
Not a Sole ?.
I really thought there wood be someone out there that might know how to " Clean Clear Acrylic Sheet ".
Apparently not. This must be 1 of the only Threads not to be given any Info. Ho, Hum.Regards,
issatree.
Have Lathe, Wood Travel.
-
4th September 2012, 09:16 PM #3
Deceased 18/12/2020
- Join Date
- Aug 2007
- Location
- Melbourne
- Posts
- 1,856
Do not fret, kind Journeyman.
I would suggest White Spirits or Organoil Citrus Oil, after judicious testing on scrap acrylic sheet first, of course. Perhaps you could contact Organoil and ask whether the Citrus Oil will work?
But since it is UBeaut product that's on the acrylic, Neil is most probably going to give the definitive answer. This would be why no-one has responded. Just that they are waiting for "The Man" to respond.
Regards,
Rob
Reply With Quote
