Results 1 to 3 of 3

Thread: The Polishes ?.

  1. #1
    Join Date
    May 2008
    Location
    BELL POST HILL, 3215
    Age
    87
    Posts
    0

    Default The Polishes ?.

    Hi to you all,
    Have a small Problem.
    I use an Acrylic People Guard for my Small Lathe.
    How ever it is covered in Neil's Polish. I know not to use Mineral Turps as it will go all Frosty/ Cloudy.
    Metho doesn't have much affect either.
    The Question is ; " What would you use " as I would like it Clearer to see through, & see who I am talking too.
    Regards,
    issatree.
    Have Lathe, Wood Travel.

  2. #2
    Join Date
    May 2008
    Location
    BELL POST HILL, 3215
    Age
    87
    Posts
    0

    Default Not a Sole ?.

    I really thought there wood be someone out there that might know how to " Clean Clear Acrylic Sheet ".
    Apparently not. This must be 1 of the only Threads not to be given any Info. Ho, Hum.
    Regards,
    issatree.
    Have Lathe, Wood Travel.

  3. #3
    Join Date
    Aug 2007
    Location
    Melbourne
    Posts
    110

    Default

    Do not fret, kind Journeyman.
    I would suggest White Spirits or Organoil Citrus Oil, after judicious testing on scrap acrylic sheet first, of course. Perhaps you could contact Organoil and ask whether the Citrus Oil will work?
    But since it is UBeaut product that's on the acrylic, Neil is most probably going to give the definitive answer. This would be why no-one has responded. Just that they are waiting for "The Man" to respond.

    Regards,

    Rob

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •