![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
10th July 2012, 02:00 PM #1
Using an Old Broken Fridge - Must Be Stripped First?
I want to use an old fridge to lay on its back and store stuff in. How important is it to strip out the motor and coils before doing this?
And if it is important and I must/should do it are there any particular things to look out for in stripping out the cooling coils, which, I think, might have some nasty stuff in them and/or be under pressure.
Read the full thread at RenovateForum.com...
Similar Threads
-
Remove a Stripped Screw with a Rubber Band [Hot Tip]
By Reno RSS Feed in forum GENERAL ODDS N SODSReplies: 0Last Post: 4th February 2010, 10:40 AM -
Repairing a stripped thread
By zelk in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 3Last Post: 14th August 2009, 10:20 AM -
..well I stripped it! ...Whither Now?
By fanlee in forum FINISHINGReplies: 5Last Post: 3rd September 2006, 04:28 PM -
finish for chemically stripped oregon
By fbag in forum FINISHINGReplies: 0Last Post: 22nd February 2004, 11:10 PM