![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 8 of 8
Thread: Livos kunos white
-
6th July 2012, 08:52 PM #1
Cabinetmaker
- Join Date
- Jul 2009
- Location
- Perth
- Age
- 37
- Posts
- 0
Livos kunos white
Hi guys just wondering if anyone had used this finish on jarrah? If so any chance of some pics? I thinking about using it on my slab coffee table. Thanks
-
6th July 2012, 09:06 PM #2
The Livos lady
- Join Date
- Feb 2011
- Location
- Melbourne
- Posts
- 206
Light stain on dark timber
Hi Spencer,
Great choice of product if I may say so myself.....but do a sample first. Trying to stain a darker timber lighter will most likely give it a cloudy look. It looks great on e.g. ply or lighter timber, but not sure what your expectations are. Sand the sample to approx 150 grit and appy the oil, remove the excess after about 20 min, this will leave the white pigment trapped in the pores. If you like the look, then the next day cut back with a finer grit to achieve the fine furniture feel. If you sand the first sand too finely, you will glaze the surface and hardly any pigments get trapped which will make little difference to the colour. Don't let me put you off, that is why doing a sample is best, you may be pleasantly surprised or it can go the other way. good luck.Livos Australia
<O</O
-
6th July 2012, 09:08 PM #3
ive used livos ardvos and kunos. they are both great!! it kind of fills the vessels in the grain making them go dark. i have used a sealer under the livos- pre cat laquer and shellac. helps stop the darkening and gives a fuller grain filled finnish without loads of coats.
its only short one end!!
-
7th July 2012, 12:15 AM #4
I have done a test sample on some Tasmanian Myrtle. It didn't soak in a lot but still a nice finish after 3 coats. The clear looked great and will have to aquire some. As Angela says, put a bit on and try it. Thanks for the samples Angela.
-
7th July 2012, 02:00 PM #5
Cabinetmaker
- Join Date
- Jul 2009
- Location
- Perth
- Age
- 37
- Posts
- 0
Any chance of a picture claw?
-
7th July 2012, 10:13 PM #6
The Livos lady
- Join Date
- Feb 2011
- Location
- Melbourne
- Posts
- 206
Hi Miltzy
How did you go using the lacquer under the oil.... usually it does not work because the oils are penetrating rather than sitting on the surface. The Ardvos is a good general universal oil and because it has less waxes and resins than the Kunos sealer, it penetrates deeper and can deepen the colour of the timber.
Would be nice to see a photo Claw Hama. Good to hear you gave it a go.Livos Australia
<O</O
-
8th July 2012, 09:43 PM #7
Hi Guys
Sorry I hadn't been back. Ok few pics
1, Clear and White (3 coats on each as per directions on the bottle.)
2, closer up
3,clear and no finish (just to show the natural colour)ber
Sample timber is Tasmanian Myrtle, straight out of the thicknesser.
Has a lovely low luster.
Angela, local supplier for Newcastle Area is the guy at Toronto?
-
9th July 2012, 09:53 PM #8
The Livos lady
- Join Date
- Feb 2011
- Location
- Melbourne
- Posts
- 206
The third pic looks nice. The clear really brings out the features, doesn't it.
Yes, it's Simon Zablotski. He actually has quiet a large number of timber samples treated with the oils.....plus he can supply some exotic timbers too.Livos Australia
<O</O
Similar Threads
-
Southern Star - White Wheel Or White Elephant?
By Metal Head in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 2Last Post: 4th February 2009, 01:51 PM -
How to Keep White Wood White
By woodnstuff in forum FINISHINGReplies: 7Last Post: 18th August 2007, 06:35 PM -
Changing white to white
By jmk89 in forum PAINTING, PLASTERING, TILING, DECORATING, etc.Replies: 4Last Post: 13th September 2006, 03:34 PM