Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Manual for hafco bp-14a
-
10th March 2012, 08:44 PM #1SENIOR MEMBER
- Join Date
- Nov 2011
- Location
- Newcastle NSW
- Posts
- 755
Does anyone have Manual for hafco bp-14a?
Hi all,
I was hoping someone could help me track down a manual for a hafco woodmaster bp-14a.
Mostly I am looking for information on the different speeds for each pulley, and maximum and minimum blades.
Any help would be greatly appreciated.
Thanks,
Camo
-
11th March 2012, 11:56 PM #2Old Fart (my step daughters named me)
- Join Date
- Sep 2010
- Location
- Mallala S.A.
- Age
- 76
- Posts
- 0
Camo.
I know there is mention on this site some where about a web sight that has all sorts of manuals. Sorry but I can not remember where it is nor find it. If you go to pen making part on forum there will be some one there that will put you on the right track
-
27th June 2012, 06:31 PM #3SENIOR MEMBER
- Join Date
- Nov 2011
- Location
- Newcastle NSW
- Posts
- 755
Hi all,
Ok I managed to get a manual for my bandsaw thanks to the guys at "Machinery House" in Sydney (great guys, very helpful), I probably should have rang them first.
I wasn't going to post again (as this is an old post), but when I initially made the post, I made the mistake of calling it "Manual for Hafco BP-14a bandsaw" instead of "Looking for a manual for Hafco BP-14a bandsaw" and couldn't work out how to change it. Consequently I have had over 400 views and only one reply (thanks Cookie48 for your response).
Anyway as I figure most were probably looking for a manual, due to my poor choose of titles, that I would list the manual for anyone who is interested and might stumble across this post in the future (it has the speeds etc. and an exploded diagram with part numbers). The guys at Machinery House were happy for me to post the manual.
Attachment 213807
I also got a manual for a Hafco B162 16" Scroll Saw, which I will post also on a separate post should anyone be looking for this one (I needed replacement parts, which I am pleasantly surprised to find the guys in Sydney have available for me to purchase).
Thanks,
Camo