![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
Thread: Varnish -- Issues
-
15th June 2012, 06:09 AM #1
New Member
- Join Date
- Jun 2012
- Location
- Montana
- Posts
- 1
Varnish -- Issues
I'm new here, so I apologize if this post is in the wrong area.
Story: I spilled a bottle of nail polish remover on a wooden table. It didn't removed the finish, just the varnish. I ran and bought a sanding sponge thing and a semi-gloss and a satin varnish. I sanded the area and applied the satin first -- it wasn't shiny enough. I sanded it again and applied the semi-gloss. It matches, but now there are obvious edges to it.
Obviously, I have no idea what I'm doing. It's sort of an urgent issue -- this is my cousin's table.
Can anyone help?
-
15th June 2012, 07:34 AM #2
If you are having trouble matching, take it all off and start again. You shouldn't need to sand, just use fine steel wool as you remove the old finish.
Similar Threads
-
what is the defference between cellulose varnish and syntitic varnish
By kadirou830 in forum FINISHINGReplies: 2Last Post: 18th September 2011, 07:19 AM -
OHS Issues
By Grunt in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 14Last Post: 30th August 2004, 01:03 AM