![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
Thread: G'Day, Cobber.
-
11th June 2012, 05:07 PM #1
New Member
- Join Date
- Jun 2012
- Location
- Beerwah
- Posts
- 1
G'Day, Cobber.
Long time viewer first time writer.
I am a self emplloyed Light Vehicle Mechanic/ Heavy Diesel Fitter and full time tinkerer. Alas, the Timber bug has bitten and bitten hard. Theres a lot to be said about steel like cut your way in and weld your way out, not so with timber. To date I have been milling with a home made mill and 660, mainly Champhor, tallowood, ironbark, silkyoak and a bit of norfolk pine. Anyhow just saying Hi to all and wondering if someone can direct me to the best thread re fitout hardware.
Cheers
-
11th June 2012, 05:12 PM #2
Welcome aboard Tim - good lock with your seach
Cheers
Rumnut
-
11th June 2012, 07:00 PM #3
Welcome to the forum. Starting from the milling and going all the way to the final polish.
-
11th June 2012, 10:44 PM #4
G'Day & welcome Tim [a glasshouse mountain boys],
You'll find a heap of helpful & knowledgable blokes & ladies on the forum all very willing to assist.
Make sure you showoff your handiwork as everyone loves a photo especially seeing WIP photos with build notes.
Enjoy your woodwork.
Enjoy the forum.
Cheers, crowie
-
12th June 2012, 05:31 AM #5
Welcome aboard
Similar Threads
-
G'day g'day, and how ya goin?
By J_L in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 6Last Post: 5th January 2011, 07:46 AM -
g'day gday g'day
By woodyou in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 6Last Post: 20th August 2009, 01:27 AM