![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Door jamb kits
-
8th June 2012, 07:30 PM #1
Door jamb kits
New project starting this weekend, building a partition wall with double doors to divide our downstairs into a media room and separate hallway.
I am pretty sorted on everything except the door jambs, I was looking at the kits in Bunnings the other day (only single doors, really helpful) and the jambs are 116m wide. Now I am using 90x35 stud work with 10mm drywall either side - this may be a stupid question but why arent they 110mm or even 112mm?
Is there anything special about the kits, can I just buy separate primed MDF of the same size given they don't do double door kits?
Read and reply to the full thread at RenovateForum.com....
Similar Threads
-
broken door jamb
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 17th September 2009, 07:40 PM -
Help with door jamb heights
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 11th January 2009, 01:00 AM -
Door Jamb Clearances
By mlnew in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 10Last Post: 10th April 2007, 11:56 AM -
Door Jamb Depths
By OBBob in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 6Last Post: 8th March 2007, 08:59 AM -
Door Jamb gap blues
By dondon in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 2Last Post: 7th July 2006, 03:02 PM