Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3

Thread: White Frost

  1. 16th May 2005, 01:14 PM #1
    End Grain's Avatar
    End Grain
    End Grain is offline Would u like a Hot Pocket
    Join Date
    May 2005
    Location
    Melbourne
    Posts
    10
    Post Thanks / Like

    Default White Frost

    Hey all,

    I have just finished a Jarrah entertainment unit. After sanding to a 600 grit finish, I oiled it with Danish oil and then applied Organoil wax. This was approx 2 weeks ago now. In this time a white "frost" has appeared on the unit and thinking it was a wax build up (which still could possibly be) I tried buffing it but to know avail. Any suggestions?? I have just purchased a Birregurra Surface remover to try and remove this possible build-up and then use the Birregurra wax. Would this work??
    Reply With Quote Reply With Quote
  2. 17th May 2005, 08:10 PM #2
    JB's Avatar
    JB
    JB is offline SENIOR MEMBER
    Join Date
    Jan 2002
    Location
    Sunshine Coast, Qld
    Posts
    117
    Post Thanks / Like

    Default

    Wipe the wax off a small area with turps. If the frost disappears, it's the wax. Clear wax sometimes glazes like that, especially during cold weather. How IS the weather down there in Melbourne, End Grain? It's sunny as usual in Brisbane.
    Rusty
    Reply With Quote Reply With Quote
  3. 18th May 2005, 10:13 AM #3
    End Grain's Avatar
    End Grain
    End Grain is offline Would u like a Hot Pocket
    Join Date
    May 2005
    Location
    Melbourne
    Posts
    10
    Post Thanks / Like

    Default

    JB,

    Thanks for the reply . Typical Melbourne weather here, 4 seasons in one day, weather not quite as nice as Brissy.
    All right chaps... back to work!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules