![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
Thread: Timberly Grinding Spacer Set
-
26th March 2012, 01:28 PM #1
Timberly Grinding Spacer Set
The Timberly Grinding Spacer Set is used in conjunction with your Tru-grind sharpening jig.
This allows you to get the repeatability required when using the jig and takes into account the wearing down of the wheel in normal use. The settings are for the 4 standard angles 30, 35, 45 and 55 degrees. If you prefer different angles then you could make your own jigs to suit.
The instructions that come with the jig make it easy for you to use.
Can be used with any 6" or 8" bench grinder and also with grinders that have the Optigrind CBN wheelsJim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
26th March 2012, 07:54 PM #2
Old Fart (my step daughters named me)
- Join Date
- Sep 2010
- Location
- Mallala S.A.
- Age
- 76
- Posts
- 0
Jim.
Great. Have had patterns to make them for 12 months. To darn lazy me. Rekon my next order will be them.
Similar Threads
-
What size reo spacer?
By Reno RSS Feed in forum BRICKWORK, CONCRETING, PAVING, RENDERING, etcReplies: 0Last Post: 19th June 2009, 03:00 PM -
Nail Gun - Spacer
By hbomb in forum GENERAL ODDS N SODSReplies: 5Last Post: 6th February 2006, 03:09 PM