![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
15th March 2012, 10:30 AM #1
Quick lesson needed in Flashing windows
Well I think one of the reasons for the rot in this walls weatherboards and the borer in the floor may have to do with the lack on any flashing around the windows.
Now that the braceply is up and sealing the walls I need to reinstall the cheap window as a temporary measure.
The wall will eventually be battened out and clad with a durable substance but will have to stand alone "AS-IS" for a few months
Is it OK to use aluminium as temporary measure or should I add the battens now with the flashing underneath and trim to fit or as advised
Read and reply to the full thread at RenovateForum.com....
Similar Threads
-
Flashing and Installing New Wood / Timber Windows and door frames
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 12th October 2010, 12:10 AM -
Flashing for weatherboard house windows
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 9th September 2010, 11:20 PM -
Finishing flashing on replacement windows - current practice?
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 4th September 2009, 09:30 PM -
Flashing over exposed windows
By ubeaut in forum BRICKWORK, CONCRETING, PAVING, RENDERING, etcReplies: 0Last Post: 16th November 2008, 07:18 AM