Results 1 to 8 of 8
Thread: Mirrortone Polyurathane
-
5th May 2005, 08:48 PM #1New Member
- Join Date
- May 2005
- Location
- Terang Vic
- Posts
- 4
Mirrortone Polyurathane
As a new member I am interseted in where I can obtain information on Mirrortone finishes and preparatory coats for use on river red gum furniture.
I beleive it is a spray job so I will have to by a compressor and spray setup
-
5th May 2005, 08:56 PM #2
Might be wrong but don't think Mirotone make Polyurethane.
They do make furniture lacquer , Precatalysed and 2 pack. They also have sanding sealer. These are all similar to Automotive finishes to use
All 2 pack finishes need special protective gear.
Whereas precat just uses normal protective gear.
You need a spraygun setup.
Redgum comes up great with precat.
-
5th May 2005, 09:28 PM #3
Mirrotone do all sorts of stuff.
I know that they do 2 pack poly
I don't know about single pack.
But why would you bother their single pack precat nitro lacquer is good stuff.
They are quite happy to chat with you. But understand that 4L is about the smallest tin & you thinn it heaps. 4L goes a long way.Any thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
-
6th May 2005, 05:35 PM #4New Member
- Join Date
- May 2005
- Location
- Terang Vic
- Posts
- 4
presdent121
Originally Posted by soundman
-
6th May 2005, 08:20 PM #5In pursuit of excellence
- Join Date
- Apr 2001
- Location
- Melbourne S.E Burbs
- Posts
- 94
Do a search !!!
A good tip for all newbs is to use this board's search facility. Type "mirotone" into the search window and you'll be rewarded with 61 hits which discuss mirotone in varying degrees. On of those is a post from myself, passing on some advice from Mirotone's Melbourne tech support guy that their New Zealand website is heaps better than the Australian one :
http://www.mirotone.co.nz/
On it you can find full specs of all Mirotone's different finishes.
With regards to Victoria, their office is in Dandenong and a search of the yellow pages website says :
Mirotone (Vic) Pty Ltd
13 Abbotts Rd Dandenong VIC 3175
ph: (03) 9797 5888 Coatings--Protective
I'm sure they'll be able to put you onto a reseller that's closer to you than they are.
Search is a beautiful thing..................
Justin.
-
6th May 2005, 09:54 PM #6Originally Posted by Justin
-
8th May 2005, 09:41 PM #7New Member
- Join Date
- May 2005
- Location
- Terang Vic
- Posts
- 4
presdent121
Many thanks to you all for the info on Mirotone products. I will give the Dandenog conact a call next week and have a look at the kiwi site this evening.
Thanks also for the search tip.
-
9th May 2005, 04:44 PM #8
Pressure Pacs for smaller work
Mirotone also do their Pre Cat Nitro Laq in pressure packs. Not much chop for large things but ideal for smaller stuff such as pens and other small turnery. I also use the sanding sealer under the Laq and polish finally with their wax using either oooo steel wool or a well worn green scotchbrite. Comes up loverly!
Aus website is http://www.mirotone.com.au/
Bookmarks