Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
14th December 2011, 02:32 PM #1Senior Member
- Join Date
- Jan 2008
- Location
- Brisbane
- Posts
- 144
Need some 100x12 flat offcuts in Brisbane
Thought I would try one last time in here before resorting to buying new steel - has anyone in Brisbane got some 90/100mm wide x 12mm or thicker flat bar offcuts - I need 2 pieces at 100mm long or so to make some Ferguson 35 Tractor sleeve pulling pads - the engine has an 87 mm bore.
PM if you maybe have something laying around at work or home that might do the job.
Thanks in advance for any help.
-
14th December 2011, 09:40 PM #2Dave J Guest
I would try your local steel place for an off cut, or you local welding shop for the same.
Dave
-
15th December 2011, 10:23 AM #3Intermediate Member
- Join Date
- Dec 2010
- Location
- nsw
- Posts
- 46
The time & expense incurred looking for free pieces would most likely make a
new piece look cheap.
-
15th December 2011, 11:39 AM #4Dave J Guest
I don't think you will get it free, my local steel place has an off cuts corner and they just charge a few bucks depending on what you want. It then goes in for beer money for all the boys. I usually find it's about 60-80% off the normal price.
Dave
-
16th December 2011, 09:01 AM #5Senior Member
- Join Date
- Jan 2008
- Location
- Brisbane
- Posts
- 144
Thanks for your suggestions - looks like I have found some usable steel thanks to a helpful member of the forum.