Results 1 to 11 of 11

Thread: Turner handles

  1. #1
    Join Date
    Jun 2009
    Location
    Perth Western Australia
    Posts
    2

    Question Turner handles

    Can anybody help me. I have broken one handle of a set of eight on a cabinet. It is a Turner H660 x 2-1/2 inch. I know they are discontinued from reading other posts but thought maybe someone might have a second hand one or a relic sitting in their shed somewhere.

    Thanks,

  2. #2
    Join Date
    Mar 2007
    Location
    Munruben, Qld
    Age
    84
    Posts
    0

    Default

    Sorry can't help you but welcome to the forum anyway
    Reality is no background music.
    Cheers John

  3. #3
    Join Date
    Dec 2006
    Location
    East of Melbourne Aus.
    Age
    73
    Posts
    166

    Default

    Got a photo?
    I am learning, slowley.

  4. #4
    Join Date
    Jun 2009
    Location
    Perth Western Australia
    Posts
    2

    Default Turner handles

    I'll take a photo today and endeavour to put it up.
    Thanks for your help. Well, here it is......
    Last edited by P Williams; 21st June 2009 at 11:44 AM. Reason: Add photo

  5. #5
    Join Date
    Jul 2004
    Location
    Brisbane
    Posts
    5

    Default

    If by some miracle you are still looking for this, I think I can help. I'll PM you as well. I think I have four of these I found in my old shed (came with the house). The writing on the handles is so small I can't really read the last number but they are certain Turner H660 2 1/? and they seem to be about 2 and a half inches across. Get in touch if still looking...

  6. #6
    Join Date
    Jan 2007
    Location
    Katoomba NSW
    Posts
    332

    Default

    Quote Originally Posted by princhester View Post
    If by some miracle you are still looking for this, I think I can help. I'll PM you as well. I think I have four of these I found in my old shed (came with the house). The writing on the handles is so small I can't really read the last number but they are certain Turner H660 2 1/? and they seem to be about 2 and a half inches across. Get in touch if still looking...
    I'm afraid Mr Williams hasn't logged on for over 2 years so he may not get back to you or respond to a pm.
    Those were the droids I was looking for.
    https://autoblastgates.com.au

  7. #7
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Would be a surprise to see if he does and still wants the handle.

  8. #8
    Join Date
    Jul 2004
    Location
    Brisbane
    Posts
    5

    Default

    My thought was that he may have subscribed to the thread using a still current email addy. I guess not.

  9. #9
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Quote Originally Posted by princhester View Post
    My thought was that he may have subscribed to the thread using a still current email addy. I guess not.
    I have.

  10. #10
    Join Date
    Sep 2011
    Location
    Hastings, Victoria
    Posts
    1

    Default Turner Handles

    HI, I noticed a while ago some of you answer to a request about Turner H660 * 2 1/2 handles. Do anyone by any chance still have one left? I just picked up a dresser for my daughter and one of the handles is missing. If you do Please let me know.
    Last edited by chumel08; 17th September 2011 at 09:41 PM. Reason: Changing request

  11. #11
    Join Date
    Jul 2004
    Location
    Brisbane
    Posts
    5

    Default

    Quote Originally Posted by chumel08 View Post
    HI, I noticed a while ago some of you answer to a request about Turner H660 * 2 1/2 handles. Do anyone by any chance still have one left? I just picked up a dresser for my daughter and one of the handles is missing. If you do Please let me know.
    I still have them. Before I send one, just to check the ones I have are the right size, how about you give me the measurement from the very tip to the very tip across your handles? I'm working at the moment so I don't have them handy. I suggest this because as I said I can't read the last digit on the handles and they could be 2 1/4 or something.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •