Results 1 to 9 of 9
  1. #1
    Boringgeoff is offline Try not to be late, but never be early.
    Join Date
    Apr 2011
    Location
    Bakers Hill WA
    Age
    76
    Posts
    138

    Default Fraying flyscreen

    Hi all, we've got a camper trailer with zippered flyscreen doors which are starting to fray along the zipper.
    When it was made the zip was sewed in with only one line of stitching either side, and now it is fraying back to the stitching.
    We got advice that it could cost $1000.00 to fix due to the difficulty of removing the tent from the trailer and re attaching it (6 hrs). They need to remove it to get it into the sewing machine.
    What about a hand held sewing machine? We had them for bag sewing on the harvester when I was young, so I imagine such a thing is available for upholstery.
    Another option might be glue. One of our sons suggested a hot glue gun but we're not too sure about that. We dont want to end up with ugly mess.
    Any ideas?
    Geoff.

  2. #2
    Join Date
    Oct 2006
    Location
    Tallahassee FL USA
    Age
    82
    Posts
    0

    Default

    Would wire staples be too ugly? I have a hand-held stapler (Swingline, no other ID) I use for basting as I'm a lousy seamstress. You might need to re-squeeze with pliers if the zipper track interferes with the stapler anvil. With plenty of staples, from both sides if you like, should be stronger than stitching. And an accidental design "feature" if you space them regularly.

    I think hand-held sewing machines make a cable stitch (only one spool of thread), and unravel if the right loop is released. Beneficial for bags of grain, not so good for your need.

    Cheers,
    Joe
    Of course truth is stranger than fiction.
    Fiction has to make sense. - Mark Twain

  3. #3
    Join Date
    May 2008
    Location
    BELL POST HILL, 3215
    Age
    87
    Posts
    0

    Default The Fray.

    Hi Geoff,
    Would it be possible to use some kind of Material over the Fraying, & glue down with Contact Adhesive, as it is a bit pliable.
    Sorry, only guessing.
    Regards,
    issatree.
    Have Lathe, Wood Travel.

  4. #4
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    140

    Default

    As one who does this as a very part time hobby, I think the best option will be to have it re sewn, you could save some dollars by removing and refiitting the tent yourself, with a couple of mates as Joe said the stitch that bag stichers use is not realy strong enough, it is designed to be easily pulled apart, the only other heavy duty hand held that I am aware of is used use in the geo textile industry, but I think that also is a chain stitch machine

  5. #5
    Boringgeoff is offline Try not to be late, but never be early.
    Join Date
    Apr 2011
    Location
    Bakers Hill WA
    Age
    76
    Posts
    138

    Default

    G'day Joe, Issatree and China, thanks for your interest. Yes I see what you mean about the bag stitcher. The actual removal of the tent off the trailer would be a huge job to my way of thinking, with overlayed interior trim etc. It is the hard floor type that is the top when you're towing.
    We might see if we can partially open it and pull the fly screen out and then close it loosely and see if we can get at it that way.
    The material strip and contact glue idea might be the easiest and quickest way to go in the end.

    Regards, Geoff.

  6. #6
    Join Date
    May 2002
    Location
    in the outer reaches of Sth Oz
    Age
    75
    Posts
    228

    Default

    Another labour intensive method is to hand sew it. Saddlers do it so the needles and thread is available. Just thought I would trow in something from the darkside
    Pete
    (part time darksider)
    What this country needs are more unemployed politicians.
    Edward Langley, Artist (1928-1995)

  7. #7
    Boringgeoff is offline Try not to be late, but never be early.
    Join Date
    Apr 2011
    Location
    Bakers Hill WA
    Age
    76
    Posts
    138

    Default

    Well thanks fxst. Not such a bad idea when you consider the labour intensity of removing the tent from the trailer.
    And because we use one door more than the other do that one first and the other later. Just need to get swmbo to give me some tuition.
    G.

  8. #8
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    0

    Default

    Back in my F/X days, I sometimes had to rig something with fabric and we NEVER had enough time to think it through. We used a glue-like product called Fray-Check that was available in sewing/cloth stores.
    I would not advise hot glue unless you can remelt and smear the stuff to get it to penetrate both the screen and the fabric. Plus, one mistake and the zipper will never work again. Seems to lose much of it's adhesion if/when it gets wet.

  9. #9
    Boringgeoff is offline Try not to be late, but never be early.
    Join Date
    Apr 2011
    Location
    Bakers Hill WA
    Age
    76
    Posts
    138

    Default

    Hi RV, thanks for that advice, I'll see if I can find something like Fray- check in Perth. Maybe one of the camping stores might be the go.
    Geoff.

Similar Threads

  1. replacing flyscreen wire
    By Reno RSS Feed in forum GENERAL ODDS N SODS
    Replies: 0
    Last Post: 25th January 2011, 02:00 PM
  2. Flyscreen for Curved Window
    By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 0
    Last Post: 15th February 2010, 06:10 PM
  3. pull aside flyscreen?
    By ubeaut in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 0
    Last Post: 16th November 2008, 07:21 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •