Page 1 of 2 12 LastLast
Results 1 to 15 of 18
  1. #1
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    46
    Posts
    479

    Default It never ceases to amaze me ….

    ........ how the guy on Better Homes and Garden can keep coming up with projects to ruin good timber ……
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  2. #2
    Join Date
    Oct 2002
    Location
    Brisbane, QLD, Australia
    Age
    47
    Posts
    0

    Default

    agreed!
    And to be honest, I've seen stump chopping blocks that look better than what he made
    How much wood could the woodchuck chuck if the woodchuck could chuck wood?

  3. #3
    Join Date
    May 2003
    Location
    Melbourne, Victoria
    Age
    50
    Posts
    641

    Default

    Can't say as I watch the crap since I saw them make an outdoor something from MDF.

    Dan
    Is there anything easier done than said?
    - Stacky. The bottom pub, Cobram.

  4. #4
    Join Date
    Aug 2002
    Location
    Perth, WA
    Age
    77
    Posts
    884

    Default

    I can't watch it. The whole bloody programme is put together by Philistines. Their theme tune is a Muzak version of a classic Beatles number, for heaven's sake!

    The one and only time I've ever got anything entertaining out of it was a couple of years back. The cookery sheila (who has since been replaced) was making pasta. She explained that Italians test its readiness by biting it. When the pasta has achieved the appropriate consistency, it is considered to be al dente.

    However, her confident explanation was spoilt by the fact that she pronounced the key Italian phrase: "al dontay" - which is how the French might pronounce it. From that point on, she was known in our house as Big Al (no relation, of course, to a well known foilie-wearing, brick-laying Craporium proprietor, who is known as Much Bigger Al).
    Driver of the Forums
    Lord of the Manor of Upper Legover

  5. #5
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    2,869

    Default

    Quote Originally Posted by DanP
    Can't say as I watch the crap since I saw them make an outdoor something from MDF.
    Be fair Dan, they would have painted it with that special paint that goes rusty so it looked like metal.

    P

  6. #6
    Join Date
    May 2003
    Location
    Melbourne, Victoria
    Age
    50
    Posts
    641

    Default



    Would give you a greenie but I can't.

    Dan
    Is there anything easier done than said?
    - Stacky. The bottom pub, Cobram.

  7. #7
    Join Date
    Jan 2004
    Location
    Over there a bit
    Age
    17
    Posts
    503

    Default

    Most of the timber is treated pine, so doesn't count anyway. The good part is, the crap he does makes my stuff look half acceptable.
    Boring signature time again!

  8. #8
    Join Date
    Nov 2004
    Location
    Mount Hutton N.S.W
    Age
    60
    Posts
    0

    Talking

    He must of plastered a litre of glue on it.

    At $40 a litre that is a dear stool to sit on,my blocks of wood in the backyard ready for the wood heater look just as good

  9. #9
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Quote Originally Posted by DanP
    Can't say as I watch the crap since I saw them make an outdoor something from MDF.

    Dan
    I think youll find it is exterior grade mdf....

    Al

  10. #10
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    Is that the stuff boats are made of Al?
    Regards, Bob Thomas

    www.wombatsawmill.com

  11. #11
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Why of course mon ami, what else do you expect from one of the great sailing nations of the world...cardboard boats????


    Al :eek:

  12. #12
    Join Date
    Mar 2005
    Location
    Too close to Sydney
    Posts
    133

    Default

    You mean there's something wrong with external grade MDF. The next thing you're going to say is that marine chipboard is no good.

  13. #13
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    46
    Posts
    479

    Default

    When building boats I prefer to use marine grade peg board ......
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  14. #14
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    And does everyone else stick their boats together with blu tack???
    Regards, Bob Thomas

    www.wombatsawmill.com

  15. #15
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    2,869

    Default

    Blue Tac is fine in areas where there is a lot of flex and you don't want to risk the glue cracking.

    On the other hand I dont' know what they use to paint the colour coat on ships, but it's designed to wear off to expose the that paint that looks like rust when they run aground.

    I think they must have used particle board in the early days, if you look at the photo you can see where it's starting to bubble.

    P.

    Note: I pinched the photo off the internet and now I can't find where from to provide the appropriate acknowledgement...If it was you I'm sorry OK??
    Last edited by bitingmidge; 3rd April 2005 at 09:06 AM.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •