Results 1 to 3 of 3
Thread: steel stumps
-
29th March 2005, 05:14 PM #1
Intermediate Member
- Join Date
- Dec 2004
- Location
- Bendigo
- Posts
- 23
steel stumps
A couple of months ago I posted a question about restumping. After all the advice I got I have decided to not use red gum. I might use concrete but at the moment I am more interested in steel stumps can anyone reccomend where to get them etc I am in Victoria
-
29th March 2005, 09:12 PM #2
Novice
- Join Date
- Jun 1999
- Location
- Newcastle NSW
- Posts
- 10
-
30th March 2005, 09:44 PM #3
Cool dude
- Join Date
- Oct 2001
- Location
- Warwick, QLD
- Age
- 45
- Posts
- 1,175
I am not sure not sure if this will help but these are some stumps that a friend has made for his house. The stump was 3 inch RHS and on top of that there was a piece of similar RHs welded on its side. The threaded rod went through a hole in the top RHS and had a nut on it. Then on top there was a plate which you bolt to the bearers of the house.
The main advantage of this is that you have the capability to adjust the stumps later on down the track if you need to and you don't have to be as critical when you place the stumps.
P.S. We had a local metal fab bloke make them for him. Not very expensive out of memory.Have a nice day - Cheers
Bookmarks